Conditions; Completing; Program; On Each Record Sheet - Toshiba strata DK8 Installation Instructions Manual
Hide thumbs
Also See for strata DK8:
- Installation and maintenance manual (609 pages) ,
- User manual (90 pages) ,
- General description manual (46 pages)
Table of Contents
Advertisement
PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM
RECORDS
SECTION 100-816-302
MARCH 1993
user. Digits may also be deleted
from the front of
the dialed number.
6.13
LCR
Station
Access
Priority
Assign-
ments.
Each station
port defined
in the system
may be assigned
to one of four station
priority
groups.
The groups
can have varying
access
to
the defined
call routes at different
times of day.
Each group is partitioned
from the other groups.
6.20
Conditions
6.21
A number
of conditions
apply to LCR as-
signments.
A summary
of each
is listed
here.
Paragraph
7, Completing
the Least Cost Routing
Record
Sheets,
gives more detailed
explanations
and examples
of how the conditions
relate to the
programming
process.
6.22
If a station
has direct
CO appearances
or
pooled
CO line buttons
programmed
to allow
direct outgoing
line access,
LCR will be bypassed
using the pooled
line or a CO line button.
6.23
LCR accommodates
special
code dialing,
such as 911 for emergency
response,
I-411
or
411 for information,
or 800 area code
toll-free
numbers.
These calls can be directed
to the local
call route.
Examples
are given
in Paragraph
4
(see Program
50-31
- 35).
IMPORTANT
NOTE!
Always
provide
emergency
service
ac-
cess for numbers
such
as 911.
6.24
Basic System
Record
programs
related
to
LCR include:
l
Program
16 defines
which
outgoing
CO lines
are assigned
to CO line groups
81 - 88.
l
Program
40 denies a station complete
CO line
access.
This also applies
to LCR.
l
Program
41 restricts outgoing
CO line calls to
selected
stations.
These
stations
may make
outgoing
calls through
LCR.
6.25 Standard
telephones
that are Toll Restricted
should
be required
to use LCR to place outgoing
calls. This prevents
Toll Restriction
defeat
when
the QRCU (in DK8) or K4RCU
(in DK16) times out.
2-30
7 COMPLETING
THE
LEAST
COST
(LCR)
~
ROUTING
SYSTEM
RECORD
NOTE:
Allstations
using LCR should be ALLOWED
CO line access in Program
40, and DENIED
CO line access in Program
41.
7.01 The following
instructions
explain
comple-
tion of the System
Record
Sheets
used to pro-
gram LCR. Instructions
are arranged
in the same
order as data tables
in the Least
Cost Routing
System
Record
The instructions
are intended
to
give a concise,
general
definition
of LCR charac-
teristics
defined
by each record sheet.
NOTES:
1. On each
record
sheet,
enter
required
data
in the space
provided
to make
a
selection,
unless otherwise
specified.
2. The initialized
state and considerations
are documented
on the record
sheet.
7.10 LCR CO Line Programming
Reference
Chart
7.11
This chart
is intended
for reference
only.
Information
relevant
to LCR is compiled
here from
Basic System
Programming.
1) Under the column labeled "CO Lines in Group
(01 - 08)," enter the numbers
of the CO lines
assigned
to groups
81 - 84 (for STRATA
DK8) or 81 - 88 (for STRATA
DK16).
Refer
to the completed
record sheet in Program
16
for this information.
2) Under
the column
labeled
"CO Line Type/
Comments,"
enter the service type, the com-
mon carrier
name,
or the line type for each
line group, e.g., local line, Foreign
Exchange
(FX) to 818 (LA), WATS (out of state),
etc.
3) Refer to Basic System
Record,
Program
40,
to restrict stations
from incoming
and outgo-
ing access of CO lines, including
using LCR.
All stations
that
must
use
LCR to make
outgoing
calls must NOT be restricted
in this
program.
These restrictions
doapply
to LCR.
Advertisement
Chapters
Table of Contents
