3.
Using an Ethernet (RJ45) cable
1. Turn the speaker on and wait for it to completely boot up. It will take
approximately 60 seconds, and during this time the Wi-Fi LED will
blink RED and WHITE. When boot up is complete the Wi-Fi LED will
blink WHITE.
2. Connect the speaker to a Wi-Fi router using an Ethernet (RJ45) cable.
Wi-Fi
Router
Ethernet (RJ45) cable
3. When the Wi-Fi LED turns a solid RED color your setup is complete
and your speaker is connected.
Note : Inserting any cable other than an Ethernet (RJ45) cable into the Eth-
ernet port of the speaker can damage the speaker.
: When an Ethernet (RJ45) cable is connected, the Wi-Fi function will
be disabled.
(not supplied)
13