Sharp VN-EZ1U Service Manual page 11
Mpeg-4 digital recorder
Hide thumbs
Also See for VN-EZ1U:
- Operation manual (93 pages) ,
- Owner's manual (48 pages) ,
- Operation manual (42 pages)
Table of Contents
Advertisement
Color temperature
Low
Compensation
value
Low
Address 1 F5 (B) 4
Address 1 F6 (R) )
'IDown
Fixed
High
Low
Fixed
VDown
Low
High
Fixed
I
AUP
I
High
Low
High
Within standard
AUP
VDown
Fixed
AUP
High
Within standard
Within standard
Low
AUP
VDown
VDown
VDown
Within standard
Within standard
High
Within standard
AUP
Adjustment end
AUP
Adjustment end
5-2-4. EEPROM INI (initial) method
Apply this when EEPROM is replaced or the version of the microcomputer
is increased.
n
Adjustment preparation and check items
Before entering the initial screen of the test mode, insert the smart medium in which data is already written.
Moreover, check the version.
Initial screen of TEST MODE
Version display +
Screen of EEPROM INI (PRO)
Screen of EEPROM INI
Screen of EEPROM INI (ALL)
VN-EZl U
a) PRO (protect) mode
Rewrite the other data except the white balance setting, TFT setting and clock with the data in the smart medium-l) The initial screen
of the test mode is displayed.
1) The initial screen of the test mode is displayed.
2) Press the ) key to display EEPROM INI screen.
3) Press the 4 key to display INI (PRO) screen.
4) Press the shutter button to rewrite the data with the data in the smart medium.
In approx. 1 second, it will automatically
return to EEPROM INI screen.
5) Press the MENU key, and it will return to the initial screen of TEST MODE. Then turn off the power to complete the setting.
6) Perform steps in "5-l-2.
Return of user setting to default setting".
7) Then turn off the power to complete the setting.
b) ALL mode
Rewrite all data of EEPROM with the data in the smart medium.
1) The initial screen of the test mode is displayed.
2) Press the ) key to display EEPROM INI screen.
3) Press the ) key to display INI (ALL) screen.
4) Press the shutter button to rewrite the data with the data in the smart medium.
In approx. 1 second, it will automatically
return to EEPROM INI screen.
5) Perform steps in "5-2-3. Method of adjusting the LCD display" and "5-2-5. Camera (CCD white balance) adjusting method".
6) Press the MENU key, and it will return to the initial screen of TEST MODE. Then turn off the power to complete the setting.
7) Perform steps in "5-l-2.
Return of user setting to default setting".
8) Then turn off the power to complete the setting.
*Use the smart medium, FD adaptor or PC card which is copacked or optional.
5-4
Advertisement
Table of Contents
