Parameters/address space
4.4 Address space
Measuring range center
With this parameter, you determine the temperature over which the scaled measuring range
is symmetrically spanned. The value must be within the nominal range of the underlying
measuring range. It is specified in integers.
Maximum = overflow (scaled measuring range)
Minimum = underflow (scaled measuring range)
4.4
Address space
The module can be configured differently in STEP 7; see following table. Depending on the
configuration, additional/different addresses are assigned in the process image of the inputs.
Configuration options of AI 8xU/R/RTD/TC HF
You can configure the module with STEP 7 (TIA Portal) or with a GSD file.
When you configure the module by means of the GSD file, the configurations are available
under different abbreviations/module names.
The following configurations are possible:
Table 4- 4
Configuration options
Configuration
1 x 9-channel without value status
1 x 9-channel with value status
9 x 1-channel without value status
9 x 1-channel with value status
1 x 9-channel with value status for
module-internal shared input with up
to 4 submodules
34
Short designation/
module name in the GSD file
AI 8xU/R/RTD/TC HF
AI 8xU/R/RTD/TC HF QI
AI 8xU/R/RTD/TC HF S
AI 8xU/R/RTD/TC HF S QI
AI 8xU/R/RTD/TC HF MSI
Analog Input Module AI 8xU/R/RTD/TC HF (6ES7531-7PF00-0AB0)
Configuration software, e.g., with STEP 7 (TIA
Portal)
Integrated in the hard-
ware catalog STEP 7
(TIA Portal) as of V13,
or higher or STEP 7 V5.5
SP1 and HSP 0166
X
X
X
(PROFINET IO only)
X
(PROFINET IO only)
X
(PROFINET IO only)
Manual, 09/2016, A5E36647959-AB
GSD file in
STEP 7 (TIA Portal) V12
SP3 or higher
X
X
X
(PROFINET IO only)
X
(PROFINET IO only)
X
(PROFINET IO only)