Rename/Copy File; Read Out A File To An External Medium - Siemens SINUMERIK 840DE Operation & Programming Manual
Hide thumbs
Also See for SINUMERIK 840DE:
- Programming manual (516 pages) ,
- User manual (100 pages) ,
- Function manual (2184 pages)
Table of Contents
Advertisement
8
08.02
8.6
Rename/copy file
Precondition
Copy
Rename
8.7
Read out a file to an external medium
Read-out
RS-232-C
Start
Stop
All
files
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/810D Operator's Guide ManualTurn (BAM) – 08.02 Edition
Sequence of operations
The file is selected.
Select the function you require by choosing the appropriate soft key.
Enter a new file name and accept by pressing the "Input" key or "OK"
soft key.
Press soft key "Back" to abandon the function.
When exporting data to an external data medium, please note the
output formats and device settings of the RS-232-C interface.
Sequence of operations
Position the cursor in the directory on the file you want to export.
Select the soft key labeled "Read-out RS-232-C".
Start transmission from data device.
Select the soft key "Start".
The selected file is now exported.
The name of the file and the number of transmitted bytes are
displayed in the "Read-out RS-232-C" window.
You can interrupt the data transmission by selecting the "Stop" key.
Selecting the "Back" soft key returns you to the higher-level directory
overview. The "Read-out RS-232-C" function remains active if a
RS-232-C transmission has already been started.
When you press the soft key labeled "All files", all the files stored in
the program directory are selected for transfer.
NC start is not possible while the files are being exported.
Parts Program Management
8.6 Rename/copy file
8
8-153
Advertisement
Table of Contents
