4.4 E1 Line Programming
[740] E1 Channel Assignment
Description
Assigns a channel type to each E1 channel.
This programme is available for the KX-TD1232 only.
Selection
• E1 channel number: 01 through 30,
• Channel type: DR2 / E&M-C / E&M-P / Disable
Default
All E1 channels – Disable
Programming
1.
Enter 740.
Display: 740 E1 CH ASSIGN
2.
Press NEXT.
Display: CH NO?
3.
Enter a channel number.
To enter a channel number 01, you can also press NEXT.
Display example: CH01:Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another channel, press NEXT or PREV, or SELECT and the desired
channel number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
To assign all channels to one selection, press the
the contents programmed for channel 01.
Features Guide References
E1 Line Service
356
( =All E1 channels)
key in step 3. In this case, the display shows
E1 Programming