Table of Contents
Advertisement
3 Deployment Procedure
5.
Slide the wall mounting plate in the direction of the arrow until it clicks.
6.
Hook the unit on the screw heads.
*1
Washer
*2
Drive the screw to this point.
7.
Place the antennas according to the following illustration so that they are pointing in directions that are 90
degrees apart (for antenna diversity).
45º
Mounting (for all other countries/areas)
1.
Place the reference for wall mounting on the wall to mark the 2 screw positions.
2.
Install the 2 screws and washers (included) into the wall.
Note
•
Make sure that the screw heads are at the same distance from the wall.
•
Install the screws perpendicular to the wall.
24
Installation Guide
*1
*2
90º
45º
Hide quick links:
Advertisement
Table of Contents
