Table of Contents
Advertisement
3. Remove the connectors (4) from the five locations,
then remove the main PC board (5).
Connector (4)
Connector (4)
Fig. 1-1-17
Note:
• Return the wiring to their original positions during
assembly.
1-11. Front Net, Speaker
1. Remove four screws (1).
2. Remove the GND lead wire (2), then remove the front
net assembly (3).
3. Remove four screws (4), then remove the right speaker
(5), four screws (6) and the left speaker (7).
4. The front net assembly (3) will come apart to the front
net (8) and the chassis (9) when claws A are released.
GND lead wire (2)
Claw A
Screws (1)
Claw A
Claw A
Claw A
Front net (8)
Chassis (9)
Front net assembly (3)
Left speaker (7)
Fig. 1-1-18
Main PC board (5)
Bundled wires
Claw A
Right speaker (5)
Screws (4)
Screws (6)
1-12.Switch PC Board
1. Remove the cushion (1).
2. Remove the connector (2).
3. Remove one screw (3), then remove the switch PC
board (4).
4. Remove the power button (5), the power button cover
(6) and the 5-knob switch button (7).
Switch PC board (4)
Connector (2)
5-knob switch
button (7)
1-13.Hinge, Top Cover
1. Remove two screws (1), remove the left support (2)
and the left hinge (3).
2. Remove two screws (4), the right support (5) and the
right hinge (6), then remove the top cover (7).
Right
support (5)
Screws (1)
Left support (2)
Left hinge (3)
1-5
Cushion (1)
Screw (3)
Power button cover (5)
Power button (6)
Fig. 1-1-19
Screws (4)
GND lead wire
GND
lead wire
Top cover (7)
Right hinge (6)
Fig. 1-1-20
- Quick Links:
- Power Supply Circuit Diagram
Hide quick links:
Advertisement
Table of Contents
