Tip
•
When the unit is reset, all the settings remain
unchanged.
Replace fuse
If there is no power, the fuse may be damaged and need to
be replaced.
1
Take out the unit from dashboard.
2
Check the electric connection.
3
Buy a fuse that matches the voltage of the damaged
fuse (15A).
4
Replace the fuse.
Tip
•
If the fuse breaks immediately after it has been
replaced, there may be an internal malfunction. In this
case, consult your Philips dealer.
EN
24
13 Product information
•
General
Power supply
Fuse
Suitable speaker impedance
Maximum power output
Continuous power output
Pre-Amp output voltage
Subwoofer output voltage
Aux-in level
Dimensions
(W x H x D)
Weight (main unit)
Disc player
System
Frequency response
Signal/noise ratio
Total harmonic distortion
Channel separation
Video signal format
Video output
Radio
Frequency range - FM
Frequency range - AM(MW)
Usable sensitivity - FM
FUSE (15A)
Usable sensitivity - AM (MW) 25 uV
LCD
Screen size
Display resolution
Contrast ratio
Brightness
Note
Product information is subject to change without prior
notice.
12 V DC (11 V - 16 V),
negative ground
15 A
4 - 8
50 W x 4 channels
24 W x 4 channels
(4
4.0 V ( CD play mode; 1 kHz,
0 dB, 10 k
4.0 V (CD play mode, 61 Hz,
0 dB, 10 k
800 mV
182 x 53 x 210 mm
3.1 kg
DVD / CD audio / MP3 system
20 Hz - 20k Hz
>75dB
Less than 1%
>50dB
NTSC/PAL only
1 +/- 0.2Vp-p
87.5 - 108.0 MHz (50kHz
per step)
522 - 1620 KHz (9kHz per step)
5 uV
7.0 inches
800 x 480 dots
500
450 cd/m2
10% T.H.D.)
load)
load)