Page 1
HISTORY INFORMATION FOR THE FOLLOWING MANUAL: SERVICE MANUAL SERVICE MANUAL AZ1-L Chassis ORIGINAL MANUAL ISSUE DATE: 1/2010 Version Date Subject 1/25/2010 No revisions or updates 1/29/2010 Corrected part information for Lens. Replaced pages i, 16-18. 3/17/2010 Corrected Disassembly/Part Number Information section. Replaced pages 12-20.
Page 2
Self Diagnosis Supported model SERVICE MANUAL SERVICE MANUAL AZ1-L Chassis LCD Digital Color TV 9-888-268-03...
“XrossMediaBar” is a trademark of Sony 40EX700 60EX700 52EX700 46EX700 registered in the U.S. and other countries. Corporation. “XMB” is a trademark of Sony Corporation and Sony Computer System HDMI, the HDMI logo and High-Definition Entertainment Inc. Multimedia Interface are trademarks or...
Page 8
SPECIFICATIONS Model name KDL- 60EX703 52EX703 46EX703 40EX703 60EX701 52EX701 46EX701 32EX700 40EX700 60EX700 52EX700 46EX700 Power and others Power requirement 110-240 V AC, 50/60 Hz (U.S.A./Canada 120 V AC, 60 Hz) Power consumption 208 W 142 W 125 W 107 W 91 W in use...
Components identifi ed by shading and ! mark on the exploded views are critical for safe operation. Replace all components with Sony parts whose part numbers appear as shown in this manual or in supplements published by Sony. It is essential that all critical parts be replaced only with the part number specifi...
Les composants identifi es par une trame et par une marque ! sur les schemas de principe, les vues explosees et les listes de pieces sont d’une importance critique pour la securite du fonctionnement. Ne les remplacer que par des composants Sony dont le numero de piece est indique dans le present manuel ou dans des supplements publies par Sony.
SAFETY-RELATED WARNING USE CAUTION WHEN HANDLING THE LCD PANEL When repairing the LCD panel, be sure you are grounded by using a wrist band. When installing the LCD panel on a wall, the LCD panel must be secured using the 4 mounting holes on the rear cover. 1) Do not press on the panel or frame edge to avoid the risk of electric shock.
SAFETY CHECK-OUT After correcting the original service problem, perform the following safety checks before releasing the set to the customer: 1. Check the area of your repair for unsoldered or poorly soldered connections. Check the entire board surface for solder splashes and bridges. To Exposed Metal Parts on Set 2.
SAFETY CHECK-OUT LEAKAGE TEST The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA(500 microamperes). Leakage current can be measured by any one of three methods.
SELF DIAGNOSIS FUNCTIONS Self Diagnosis Supported model SELF DIAGNOSIS FUNCTION The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY LED will automatically begin to fl ash. The number of times the LED fl ashes translates to a probable source of the problem. A defi nition of the STANDBY LED fl ash indicators is listed in the instruction manual for the user’s knowledge and reference.
Page 15
SELF DIAGNOSIS FUNCTIONS STANDBY LED FLASH COUNT 2 times 5 times Ambient Sensor/ Picture Off / Standby LED Power LED LED ON 0.3 sec. (IR) Infrared Receiver Timer LED LED OFF LED OFF 0.3 sec. 3 sec. KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 52EX700/52EX701/52EX703/60EX700/60EX701/60EX703...
Page 16
SELF DIAGNOSIS FUNCTIONS VIEWING THE SELF CHECK DIAGNOSTIC LIST For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confi rmed, it is possible to bring up past occurrences of a failure for confi rmation on the Self Check diagnostic screen: 1.
Page 17
SELF DIAGNOSIS FUNCTIONS CLEARING THE SELF CHECK DIAGNOSTIC LIST Since the diagnostic results displayed on the screen are not automatically cleared, always check the self-diagnostic screen after you have completed the repairs to be sure you have cleared the result display to “0”. 1.
SCREW, +PSW M5X16 (SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV) 4-170-477-01 COVER, NECK (M3A FRONT) For product protection and safety reasons, Sony strongly recommends (KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703 ONLY) that you use the screws provided with the TV 4-170-479-01 COVER, NECK (LL3A FRONT)
SCREW, +PSW M3X5 to the unit are shorter than those normally used on 7-685-646-79 SCREW, +BVTP 3X8 TYPE2 IT-3 Sony televisions. Using a longer screw will cause a 2-580-603-01 SCREW, +PSW M4X16 penetration of the front bezel assembly. B Remove screws from Rear Cover to detach from Panel...
See Appendix A: Encryption Key Components in the back of this manual. (Check the Sony Electronics Service Information website for any additional service related issues for this model.) 1-2-2. KDL-46EX700/46EX701/46EX703 AND KDL-52EX700/52EX701/52EX703 1-2-3. KDL-60EX700/60EX701/60EX703 REF.
See Appendix A: Encryption Key Components in the back of this manual. A Lift right-side Panel Bracket to detach from Panel (Check the Sony Electronics Service Information website for any additional service related issues for this model.) 1 from KDL-32EX700/40EX700/40EX703 Only...
See Appendix A: Encryption Key Components in the back of this manual. AND LCD PANEL REMOVAL (Check the Sony Electronics Service Information website for any additional service related issues for this model.) A Remove screws from Power Boards 4 from GE3-A Board (KDL-32EX700/40EX700/40EX703 Only) 1-4-1.
See Appendix A: Encryption Key Components in the back of this manual. (Check the Sony Electronics Service Information website for any additional service related issues for this model.) 1-4-2. KDL-46EX700/46EX701/46EX703 1-4-3. KDL-52EX700/52EX701/52EX703 REF.
See Appendix A: Encryption Key Components in the back of this manual. (Check the Sony Electronics Service Information website for any additional service related issues for this model.) REF. NO. PART NO.
See Appendix A: Encryption Key Components in the back of this manual. (Check the Sony Electronics Service Information website for any additional service related issues for this model.) 1-7. CONNECTORS 1-7-1. KDL-32EX700 1-7-2.
See Appendix A: Encryption Key Components in the back of this manual. (Check the Sony Electronics Service Information website for any additional service related issues for this model.) 1-7-3. KDL-46EX700/46EX701/46EX703 1-7-4. KDL-52EX700/52EX701/52EX703 1-7-5.
SEC 2. SERVICE ADJUSTMENTS 2-1. ACCESSING SERVICE ADJUSTMENT MODE 1. TV must be in Standby Mode. (POWER off). DIGITAL S ERVICE 2. Press the following buttons on the Remote Commander 001 OP within a second of each other: 000 VERS DISPLAY POWER Channel...
SERVICE ADJUSTMENTS 2-1-1. VIEWING THE SERVICE MENUS Within each Service Menu are Categories and data information. Use the Remote Commander to view the Digital, Chassis and Sub Item name Service Menus and their options. CHASSIS SERVICE Category name CXD2813R Item number H_DET_NOSIG_CNT 1 3.
SERVICE ADJUSTMENTS 2-2. ADJUSTMENTS AFTER REPLACING THE BAL BOARD 2-2-2. SELECTING THE MODEL OR LCD PANEL After replacing the BAL Board or LCD Panel, go into Service Mode to set the Model data value. The following procedures must be completed after replacing the BAL Board or the LCD panel.
6. Proceed to “Selecting the Destination”. to decrease the data value, to match the model of the TV. 2-2-3. SETTING THE DESTINATION Chassis Model Name After replacing the BAL Board or the LCD Panel, the destination location AZ1-L KDL-32EX700 3a-0 must be set. AZ1-L...
SERVICE ADJUSTMENTS 2-2-4. VERIFYING THE MODEL AND PANEL INFORMATION After saving the changes to the service data, verify the information. DIGITAL SERVICE 002 MODEL 001 DEST 03: UC (UC grp) 1. TV must be in standby mode. (Power off). 2. Access Service Mode. Press the following buttons on the Remote Commander within a second of each other: DISPLAY...
SERVICE ADJUSTMENTS Model Name Model ID Product ID Panel ID Model Name Model ID Product ID Panel ID KDL-32EX700 2577318E 40520000 LK315D3LA4S KDL-46EX703 2577319C 0C520000 LK460D3LA8S KDL-32EX700 2577318E 40520000 LK320D3LEDE120 KDL-46EX703 2577319C 0C520000 LK460D3LA8T KDL-32EX700 2577318E 0C520000 LK315D3LA4S KDL-46EX703 2577319C 0C520000 LK460D3LEDE120 KDL-32EX700...
SERVICE ADJUSTMENTS 2-3. WHITE BALANCE ADJUSTMENTS 5. To select the White Balance Adjustment setting that needs to be changed, do the following: White Balance adjustment data is located on the Digital Service Menu. a. To select R_DRV, press 1. TV must be in Standby Mode. (POWER off). b.
SERVICE ADJUSTMENTS 2-4. RESETTING THE TV TO FACTORY CONDITION 2-4-1. RESETTING THE TV TO FACTORY CONDITION USING SERVICE MODE Use the following instructions to restore the User Adjustments and Channel Memory settings to the preset factory conditions. 1. TV must be in Standby Mode. (POWER off). 2.