Grips
Feed roller
Pick-up roller
Pick-up roller and feed roller:
•
Snap off the grips and pull out each roller from its shaft. Note that the pick-up roller and the feed roller
are the same parts.
Pick-up roller clutch and feed roller clutch:
•
Disengage one claw to remove the clutch cover.
•
While lifting each shaft in the direction of the
arrow, remove each clutch from the shaft holder.
•
Disconnect the connector from the bracket.
•
Removing one setscrew allows the clutch and
the shaft to be separated.
•
The pick-up roller clutch and the feed roller
clutch are the same parts.
Mar. 1998 © TOSHIBA
Pick-up roller
Lower paper feeder unit placed upside down
8 - 11
Paper feed clutch
Clutches
Setscrews
Connector
Clutch cover
Shaft holder
1550/1560 FEEDER