Web-Based Setup - D-Link DAP-1860 User Manual
Hide thumbs
Also See for DAP-1860:
- Quick installation manual (33 pages) ,
- Technical support setup procedure (2 pages) ,
- Technical support setup procedure (4 pages)
Table of Contents
Advertisement
Section 3 - Configuration
To access the setup utility for the DAP-1860 AC2600 Wi-Fi Range Extender on
your PC, first connect to the DAP-1860 wirelessly using the Wi-Fi name (SSID) and
password located on your Wi-Fi Configuration Card. Then open a web browser
and enter http://dlinkap.local./ in your browser's URL field. You may also enter
the IP address* of the DAP-1860.
Note: Web browser configuration is not supported for Android Devices. Please
use the QRS Mobile Application to configure your device.
* The default IP address is 192.168.0.50. Once your DAP-1860 connects to the host network,
it will be assigned a new IP address based on your network's DHCP settings. You will need
to log in to your router to see what IP address is assigned to your DAP-1860.
For multiple DAP-1860s, go to http://dlinkapxxxx.local. as shown on the included Wi-Fi
Configuration Card, with "xxxx" being the last four digits of the DAP-1860's MAC address.
Enter your password. By default, Admin is the username and cannot be changed,
and by default, the password is blank.
The configuration interface will open, and you can configure the various settings
for the DAP-1860. If you have not yet configured an uplink network, the home
screen will show that there is no connection between the DAP-1860 and the
uplink router.
D-Link DAP-1860 User Manual
Web-based Setup
21
Hide quick links:
Advertisement
Table of Contents
