Yamaha CL1 Reference Manual page 226
Hide thumbs
Also See for CL1:
- Owner's manual (89 pages) ,
- Service manual (401 pages) ,
- Reference manual (306 pages)
Table of Contents
Advertisement
The following illustration shows how the signal that is output from the GPI OUT port will change in
each fader mode when a fader is operated. In this example, UPSTROKE in the THRESHOLD field is
set to –60.00, and DOWNSTROKE is set to –∞. (This illustration shows the case in which
selected as the polarity of the GPI OUT port. If the polarity is
will be reversed.)
FADER
START
250 msec
FADER
STOP
FADER
TALLY
NOTE
At the high level, the output signal of the port will be open. If the receiving device requires high
level, take it from the +5V power supply pin. However in this case, the amount of current is limited;
for details, refer to the "Input/output characteristics" section in the separate Owner's Manual.
5.
For each GPI OUT port, specify the channel that will cause the external device to
operate, and the type of operation.
6.
When you have finished making settings, click the "x" symbol located in the upper
right to close the FADER MODE screen.
, the polarity of the output signal
250 msec
is
226
Other functions
Reference Manual
Advertisement
Table of Contents
