28
Model 510 Sensor: Installation Guide
6.2 Configure Sensor Tab
The Configure Sensor tab (below) is the default tab in the Sensor UI.
It contains controls that let you specify sensor settings. The following table lists and describes these
settings.
Setting
Sensor Name
Primary AirDefense Server
IP Address
Secondary AirDefense
Server IP Address
Enter a friendly user name for the Sensor. When you open
AirDefense, this is the name the Sensors will have in the tree
panel area.
Enter the Primary AirDefense Server IP address or the
server DNS name as defined in your DNS system.
Enter the Secondary AirDefense Server IP address or the
server DNS name as defined in your DNS system. If you do
not have a Secondary server, enter the Primary Server
address or DNS name again.
Description