Advertisement

www.freeservicemanuals.info
Compact Disc Recorder
SERVICING
For servicing CDR8xx the set has to be divided into two parts:
1. Except for the CD-R/W module all workshops can repair the set on component level.
The Switched Mode Power Supply unit will be exchanged completely in case of a failure.
2.The CD-R/W module can only be repaired on component level with the help of ComPair.
With this tool diagnosing of the set can be done in an interactive way. In this tool also the adjustment procedure has
been implemented. The adjustment is absolutely necessary in case the CDR-Main Board and/or CD drive (CDR Loader)
is disconnected from the matched production combination.
Only designated workshops can perform these repairs!
Please send the complete set to the designated workshop.
Available circuit descriptions: The Basics of Compact Disc Recordable/Rewritable
TABLE OF CONTENTS
Technical Specification and Measurement setup................1-1, 1-2
Location of printed circuit boards ............................................1-3
Warnings & Safety ..................................................................2-1
Brief Operating Instructions ...............................................3-1 to 3-3
Dismantling Instructions.....................................................4-1 to 4-9
Service hints ......................................................................5-1 to 5-5
Service Test Program ........................................................5-6 to 5-8
BLOCK DIAGRAMS ..........................................................6-1 to 6-5
WIRING DIAGRAM.................................................................6-6
POWER BOARD (for orientation only) ..............................7-1 to 7-2
DISPLAY BOARD..............................................................7-3 to 7-5
KEY left BOARD .....................................................................7-6
FRONT LED BOARD..............................................................7-6
INTERFACE BOARD........................................................7-7 to 7-8
©
Copyright 2001 Philips Consumer Electronics B.V. Eindhoven, The Netherlands
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system or transmitted, in any form or by any means, electronic, mechanical, photocopying,
or otherwise without the prior permission of Philips.
Published by MS 0137 Service Audio
3rd generation Compact Disc Recording
(with reference to description of the Basic Engine)
2nd line Service Manual CDR Mozart Module
chapter
Printed in The Netherlands
Subject to modification
4822 725 25242
3104 125 40100
3122 785 60030
HEADPHONE BOARD ...........................................................7-9
3CDC MODULE................................................................8-1 to 8-9
EXPLODED VIEWS
apparatus ..........................................................................10-1
3CDC module ...............................................................8-8 to 8-9
MECHANICAL PARTSLIST see Exploded views
ELECTRICAL PARTSLIST...................................................10-2 ff
It`s Free
CDR800
/00/17
CDR802
/00S/01S
CDR820
/00/17
CDR822
/00S/01S
chapter
CLASS 1
LASER PRODUCT
©
3103 785 25100

Advertisement

Table of Contents
loading

Summary of Contents for Philips CDR800/00/17

  • Page 1 LASER PRODUCT © Copyright 2001 Philips Consumer Electronics B.V. Eindhoven, The Netherlands All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise without the prior permission of Philips.
  • Page 2: Technical Specification

    www.freeservicemanuals.info It`s Free TECHNICAL SPECIFICATION General: Mains voltage : 220V-240V / 50-60Hz for /00 100V-240V /50-60Hz for /01 120V / 60Hz for /17 : ≤ 18W Power consumption ≤ 1W in stand by Input / Output: Analog in: : ≤250mV input sensitivity max.
  • Page 3 www.freeservicemanuals.info It`s Free TECHNICAL SPECIFICATION Remote Control: RC5 commands RC283505 SYSTEM CODE RC KEY COMMAND CODE Standby BRIGHTNESS TRACK INCR. CD TEXT TEXT EDIT PROGRAM PLAY ¡ ™ STOP PAUSE SHUFFLE REPEAT RC5 code RC283505, 130300 MEASUREMENT SETUP Use Audio Signal Disc SBC429 4822 397 30184 (replaces test disc 3) S/N and distortion meter...
  • Page 4 www.freeservicemanuals.info It`s Free LOCATION OF PRINTED BOARDS Location of boards, CDR8xx, 100801 picture 1...
  • Page 5: Warnings & Safety

    www.freeservicemanuals.info It`s Free WARNINGS & SAFETY © ñ WARNING WAARSCHUWING All ICs and many other semiconductors are susceptible to Alle IC´s en vele andere halfgeleiders zijn gevoelig voor electrostatic discharges (ESD). Careless handling during electrostatische ontladingen (ESD). repair can reduce life drastically. Onzorgvuldig behandelen tijdens reparatie kan de levensduur When repairing, make sure that you are connected with the drastisch doen vermindern.
  • Page 6 The following excerpt of the Owner´s Manual serves as a very short introduction to the set. The complete Owners Manual can be downloaded in several languages from the Internet site of Philips Customer Care Center ”P3C“: http://130.144.192.42/cgi-bin/newmpr/debt.pl CDR82x only CDR82x only...
  • Page 7 www.freeservicemanuals.info It`s Free BRIEF OPERATING INSTRUCTIONS...
  • Page 8 www.freeservicemanuals.info It`s Free BRIEF OPERATING INSTRUCTIONS...
  • Page 9 www.freeservicemanuals.info It`s Free DISMANTLING INSTRUCTIONS Dismantling the Top Cover • Remove 9 screws as shown in picture 2. • Raise top cover at the rear and pull it backwards. picture 2 Dismantling the Tray Covers To dismantle the ornamental cover, the tray has to be moved out first. This can either be done by activating the Open/Close-key or manually.
  • Page 10: Picture

    www.freeservicemanuals.info It`s Free DISMANTLING INSTRUCTIONS Dismantling the Tray Covers continued picture 6 • To release the cover from the catch on the tray, pull it frontwards on bottom side as shown in picture 6 and 7. bottom view • Pull the cover up. Dismantling the ornamental cover from the CDR-tray functions in the same manner.
  • Page 11: Picture

    www.freeservicemanuals.info It`s Free DISMANTLING INSTRUCTIONS Dismantling the Front Cabinet continued picture 9 picture 10 picture 11...
  • Page 12: Pull The Module On Rear Side Up And Turn It Out See Picture

    www.freeservicemanuals.info It`s Free DISMANTLING INSTRUCTIONS Dismantling the 3CDC module picture 12 • Remove top cover and ornamental cover from the tray first → see description on page 4-1. • Loosen 2 screws on front side → see picture 12. • Loosen 2 screws at the rear as shown in picture 13. •...
  • Page 13 www.freeservicemanuals.info It`s Free DISMANTLING INSTRUCTIONS Dismantling the CDR module Fixation by a catch on left front-side • Remove top cover and ornamental cover from the tray first → see description on page 4-1. • move tray back to closed position. •...
  • Page 14 www.freeservicemanuals.info It`s Free DISMANTLING INSTRUCTIONS Dismantling the CDR module continued • Remove top cover and ornamental cover from the tray first → see description on page 4-1. • to dismantle the Loader module: - move tray completely out. - loosen 4 screws to frame as shown in picture 18. - put the module to a proper service position.
  • Page 15 www.freeservicemanuals.info It`s Free DISMANTLING INSTRUCTIONS Dismantling the Power board • Remove top cover first → see description on page 4-1. • Loosen 3 screws as indicated in picture 20. • Move the board backwards to release the mains socket. • Lift it on the rear and turn it out. picture 20...
  • Page 16 www.freeservicemanuals.info It`s Free DISMANTLING INSTRUCTIONS Dismantling the Interface Board • Remove top cover first → see description on page 4-1. • Remove Power board inclusive metal screening plate. - Loosen 4 screws as indicated in picture 21. - Move the combination backwards to release the mains socket. - Lift it on the rear and turn it out.
  • Page 17 www.freeservicemanuals.info It`s Free DISMANTLING INSTRUCTIONS Dismantling the Interface Board alternative picture 23 • Remove top cover first → see description on page 4-1. • Loosen 2 screws as shown in picture 23. • Disengage catches to bottom bottom cabinet. • Move rear plate backwards and turn it to a proper service position →...
  • Page 18: Standby

    www.freeservicemanuals.info It`s Free SERVICE HINTS SERVICE TOOLS TORX T10 screwdriver with shaftlength 150mm ........4822 395 50423 TORX screwdriver set SBC 163 ..............4822 295 50145 Audio signal disc SBC 429..............4822 397 30184 Playability test disc SBC444 ..............4822 397 30245 Test disc 5 (disc without errors) + Test disc 5A (disc with dropout errors, black spots and fingerprints) SBC 426/426A ..............4822 397 30096...
  • Page 19 www.freeservicemanuals.info It`s Free SERVICE HINTS General Service position For measurements on: Power Board For manual release of: 3CDC tray CDR tray picture 25 Service position Front Board For dismantling instructions see chapter 4-1 to 4-3 picture 26...
  • Page 20 www.freeservicemanuals.info It`s Free SERVICE HINTS Service position 3CDC Module picture 27 For dismantling instructions see chapter 4-4. picture 28 Service position CDR Module For dismantling instructions see chapter 4-5. picture 29...
  • Page 21 www.freeservicemanuals.info It`s Free SERVICE HINTS Service position CDR Loader (Basic Engine) For dismantling instructions see chapter 4-6. picture 30 Service position MOZART Board (Back-end) For dismantling instructions see chapter 4-6. picture 31 picture 32...
  • Page 22 www.freeservicemanuals.info It`s Free SERVICE HINTS Service position Power Board For dismantling instructions see chapter 4-7. picture 33 Service position Interface Board For dismantling instructions see chapter 4-8. picture 34 For dismantling instructions see chapter 4-9. picture 35...
  • Page 23: Program

    www.freeservicemanuals.info It`s Free SERVICE TESTPROGRAM To enter Service SERVICE TESTPROGRAM * To leave Service Testprogram plug mains cord off. Testprogram hold VARIOUS TEST PLAY & CD3 buttons VARIOUS TESTS * In the main menu the sound settings (volume, ...), depressed while trays and carousel work as in normal mode.
  • Page 24 www.freeservicemanuals.info It`s Free SERVICE TESTPROGRAM To enter Service SERVICE TESTPROGRAM * To leave Service Testprogram plug mains cord off. Testprogram hold PLAY & CD3 buttons CDR MODULE CDR MODULE * In the main menu the sound settings (volume, ...), depressed while trays and carousel work as in normal mode.
  • Page 25 www.freeservicemanuals.info It`s Free SERVICE TESTPROGRAM SERVICE TESTPROGRAM To enter Service * To leave Service Testprogram plug mains cord off. Testprogram hold 3CDC MODULE CD/CDC MODULE PLAY & CD3 buttons * In the main menu the sound settings (volume, ...), depressed while trays and carousel work as in normal mode.
  • Page 26: Repeat

    www.freeservicemanuals.info It`s Free BLOCK DIAGRAM STEP TEXT TOTAL TRACK TIME TOTAL REM TRACK TIME CDR80x, 200401 DISPLAY BOARD CDR80x 9 10 11 12 13 14 15 16 17 18 19 20 + COMPILE CD TRACK PROG DIGITAL CD RW CD RW OPTICAL FRONT-LED BOARD KEY BOARD left...
  • Page 27 www.freeservicemanuals.info It`s Free BLOCK DIAGRAM STEP TEXT TOTAL TRACK TIME TOTAL REM TRACK TIME CDR82x, 200401 DISPLAY BOARD CDR82x 9 10 11 12 13 14 15 16 17 18 19 20 + COMPILE CD TRACK PROG DIGITAL CD RW CD RW OPTICAL FRONT-LED BOARD KEY BOARD left...
  • Page 28 www.freeservicemanuals.info It`s Free BLOCK DIAGRAM 3CDC MODULE BLOCK DIAGRAM 3CDC-LC CDR Version CD MECHANISM MAINBOARD VAM2201, VAM2202, VAM2204 DISC M63000 7803 7802 TURNTABLE FOCB+ MOTOR FOCUS MOTOR FOCB- RADIAL RADB+ MOTOR RADB- SIGNAL PROCESSOR SLEDGEB+ SLEDGE CD10 MOTOR SAA7324 (SAA7325) SLEDGEB- TTM- TURNTABLE...
  • Page 29 www.freeservicemanuals.info It`s Free BLOCK DIAGRAM "MOZART" BOARD CDR2001 CDR MODULE 1005 VCXO 7002 2V5 GND FILTER 1201 7000 CD R/W CLK 33,86MHz 7100 CORE JTAG/BDM EBUIN2 (Pb) SUPPLY SUPPLY SUPPLY SUPPLY IN/OUT (in/out) SDRAM CONTROL MOZART ADRESS CD TEXT FLEX DATA RS232 MCF5248...
  • Page 30 www.freeservicemanuals.info It`s Free BLOCK DIAGRAM POWER SUPPLY BLOCK DIAGRAM BLOCK DIAGRAM SWITCHED MODE POWER SUPPLY / European & USA version (/00 & /17) SWITCHED MODE POWER SUPPLY / WorldWide version (/01) Lightning Lightning Protection L101, L102 Protection L101, L102 F101 F101 T102 D251...
  • Page 31: Wiring Diagram

    www.freeservicemanuals.info It`s Free WIRING DIAGRAM Line Digital Optical Optical 1301 IN/OUT IN/OUT 1315 1314 7313 7312 SWITCHED MODE POWER SUPPLY INTERFACE BOARD componentside view componentside view 8007(220mm) 8014(340mm) OP-HR/12p FFC1,25/9p/ AD 8004(160mm) OP-PH/6p EBUGND (RESET)PORE (8007, part of Changer Module) SILD FFC1,0/ 8p/ AD (340mm)
  • Page 32 www.freeservicemanuals.info It`s Free for orientation only Switched Mode Power Supply / EU + USA version (/00/17) 470k 300V 1,9V to Interface Board 1,2V 0052/0053 1000pF typ.-20V 1,9V 4,5V 2,5V 2200pF 4,8±0,45V -0,3V floating typ.-25V 16,5V -29,3±2,2V 300V 5±0,25V 4,5/0V +0,6 300V -1,2 1,1V...
  • Page 33 www.freeservicemanuals.info It`s Free for orientation only Switched Mode Power Supply / World Wide version (/01) 0,8V 300/160V to Interface Board 5,9V 0052/0053 typ.-20V 4,5V 2,5V 4,8±0,45V floating typ.-25V -29,3±2,2V 300/160V 5±0,25V 4,5/0V +0,6 -1,2 1/2,4V 300/160V 2,5V 5±0,25V IC101 1,3V/2,7V +1,5 -11,5 -12V...
  • Page 34 www.freeservicemanuals.info It`s Free 0055 J15 3478 K5 1400 F11 3479 K8 1414 I15 3480 K8 1416 F15 3481 K10 7402 DISPLAY BOARD 1417 D15 3482 K9 1418 A15 3484 J2 1419 I9 3485 K2 1420 G12 3486 J2 1421 H13 3487 K2 -30V GRID BUFFERS...
  • Page 35 www.freeservicemanuals.info It`s Free 2400 B8 2405 B10 2410 A7 2421 C5 3404 C4 3409 C3 3414 C3 3419 C2 3426 A8 3431 B3 3437 B7 3443 C7 3448 C7 3456 A5 3461 B11 3469 C14 3475 B13 3484 B11 3489 B3 3494 C7 3504 B14 3514 C5...
  • Page 36 www.freeservicemanuals.info It`s Free DISPLAY CONNECTION CDR80x REC IN PROGR (DIG) 2 FINALIZE (DIG) 1 DISC PROGRAM (OPT) 2 SHUFFLE (OPT) 1 PLAYLIST LINE REPEAT SPEED DISC TEXT EDIT TRACK TIME TIME ALBUM STEP TRACK TOTAL TRACK TOTAL display grid assignment CDR80x, 100901 DISPLAY CONNECTION CDR82x TRACK TOTAL...
  • Page 37: Key Left Board

    www.freeservicemanuals.info It`s Free 1480 A5 1483 C5 2480 C3 3522 D4 6481 B3 F481 C2 F484 D4 F487 B2 F490 C1 0051 B1 3531 C3 3533 D3 6490 B3 6492 B3 6494 C3 F496 B1 1481 E5 1484 C5 3520 C4 3523 D4 6482 B3 F482 C4...
  • Page 38 www.freeservicemanuals.info It`s Free 0052 E1 F304 B3 0053 E1 F305 B12 0054 F12 F306 B7 1301 B4 F307 B7 INTERFACE BOARD 1302 B6 F308 E4 1303 D12 F309 D11 1304 G12 F310 E11 1308 CDR82x only 2347 1305 A12 F311 E2 MICROPHONE ADC 1305 1306 D4...
  • Page 39 www.freeservicemanuals.info It`s Free 0052 B3 1302 C8 1306 C4 1315 A5 2310 B7 2318 A6 2324 B1 3309 B4 3342 A1 6301 B6 9301 C4 9305 B5 9309 A6 9313 A7 9317 B7 0053 B1 1303 C7 1307 C4 2302 B8 2312 B6 2319 A6 2327 B6...
  • Page 40: Chapter Headphone Board

    www.freeservicemanuals.info It`s Free 1660 A2 3693 F9 1661 E2 6660 C2 1662 A11 6661 C2 +12V 1663 C1 6662 D2 1662 HEADPHONE BOARD F675 1664 C3 6663 D3 HP_R 2660 B4 7660-A C5 +12V F674 +0,6 / -1,2 2661 C4 7660-B A5 typ.
  • Page 41 www.freeservicemanuals.info It`s Free Service hints CAUTION CHARGED CAPACITORS ON THE SERVO BOARD MAY DAMAGE THE CD DRIVE ELECTRONICS WHEN CONNECTING A NEW CD MECHANISM. THAT´S WHY, BESIDES THE SAFETY MEASURES LIKE • SWITCH OFF POWER SUPPLY • ESD PROTECTION ADDITIONAL ACTIONS MUST BE TAKEN BY THE REPAIR TECHNICIAN. The following steps have to be done when replacing the CD mechanism: 1.
  • Page 42 www.freeservicemanuals.info It`s Free Service hints Wiring Dismantling of Tray 1. Open the tray. Disc Motor 2. Release 2x catch as shown in fig. 2 and Detail A 3. Pull tray out. Inner switch Detail A Slide Motor fig.2 Assembling of Tray Service Position 1.
  • Page 43 www.freeservicemanuals.info It`s Free BLOCK DIAGRAM 3CDC-LC CDR Version CD MECHANISM MAINBOARD VAM2201, VAM2202, VAM2204 DISC M63000 7803 7802 TURNTABLE FOCB+ MOTOR FOCUS MOTOR FOCB- RADIAL RADB+ MOTOR RADB- SIGNAL PROCESSOR SLEDGEB+ SLEDGE CD10 MOTOR SAA7324 (SAA7325) SLEDGEB- TTM- TURNTABLE MOT1 MOTOR TTM+ LASER &...
  • Page 44 www.freeservicemanuals.info It`s Free Mapping Copperside Componentside 2800 F4 3734 D2 3845 D2 4815 H3 7817 F3 0801 A4 2801 D4 3735 E2 3846 E2 4820 C4 7819 E2 0802 G2 2802 E4 3CDC-LC-CDR (Herman) Copperside view 3736 H3 3847 F1 4821 E4 7820 F2 1800 F4...
  • Page 45 www.freeservicemanuals.info It`s Free 1800 2803 2808 2815 2830 2839 2846 2859 2887 3721 3727 3778 3800 3806 3820 3830 3836 3842 3847 3856 3869 7803 7820 1801 2804 2809 2817 2831 2840 2848 2878 3700 3722 3728 3779 3801 3807 3821 3831 3837...
  • Page 46 www.freeservicemanuals.info It`s Free Mapping Copperside Componentside 2800 F4 3734 D2 3845 D2 4815 H3 7817 F3 0801 A4 2801 D4 3735 E2 3846 E2 4820 C4 7819 E2 0802 G2 2802 E4 3CDC-LC-CDR (Herman) Copperside view 3736 H3 3847 F1 4821 E4 7820 F2 1800 F4...
  • Page 47 www.freeservicemanuals.info It`s Free 1802 2813 2820 2824 2829 2837 2845 3716 3767 3809 3813 3823 3828 3851 3858 3861 3865 6811 7802 1803 2816 2822 2825 2833 2838 3709 3717 3769 3810 3814 3826 3832 3853 3859 3862 3867 6812 7815 1810 2818...
  • Page 48 www.freeservicemanuals.info It`s Free EXPLODED VIEW (Drawer) 1875 1876 1880 1883 2878 3714 3739 3754 3771 6801 6808 8003 1875 1876 1881 2860 2881 3715 3745 3755 3772 6802 7812 1875 1876 1882 2872 2883 3719 3747 3765 3773 6803 7813 Drawer bottom view 1875 1877...
  • Page 49 www.freeservicemanuals.info It`s Free EXPLODED VIEW (3CDC-LC M ODULE MECHANICAL PARTS Drawer → Chapter 8-8 ––––––––––––––––––––––––––––––––––––––––––––––––––––– 3103 304 69310 DRAWER BLACK 3103 304 69320 CAROUSEL BLACK 3103 304 07120 PULLEY DRAWER BLACK 45 5x 3103 304 06850 ECCENTRIC GEAR WHEEL 3103 304 07110 NAIL FIXATION BLACK 3103 304 66850 DRIVING BELT CAROUSEL...
  • Page 50 www.freeservicemanuals.info It`s Free 10-1 10-1 EXPLODED VIEW / apparatus Pl.Torx 3x16 M3x6 Pl.Torx 3x10 Pl.Torx 3x10 1007 Pl.Torx 3x10 M3x6 M3x6 1006 Pl.Torx 3x10 1007 Pl.Torx Torx Washer 3x10 M3x6 M3x6 M3x6 Pl.Torx M3x6 3x10 Pl.Torx 3x10 (4x) M3x10 M3x6 Pl.Torx 3x10 Pl.Torx...
  • Page 51 3103 308 10490 BUTTON, SPEED, SILVER CAPACITORS 3103 304 70590 FILTER FOIL, FTD-CDR80x/82x ––––––––––––––––––––––––––––––––––––––––––––––––––––– 3139 240 00040 WORDMARK „PHILIPS“ SILVER BACKGR. 2400 © 4822 126 14305 100nF 2401 © 4822 126 14238 2,2nF CDR8ox: 2402 © 5322 126 11583 10nF 3103 308 10010 ORNAMENT.
  • Page 52 www.freeservicemanuals.info It`s Free 10-3 DISPLAY BOARD ELECTRICAL PARTSLIST RESISTORS RESISTORS ––––––––––––––––––––––––––––––––––––––––––––––––––––– ––––––––––––––––––––––––––––––––––––––––––––––––––––– 3410 © 4822 051 30683 68kΩ 0,06W 3473 © 4822 117 12891 220kΩ 0,06W 3411 © 4822 051 30683 68kΩ 0,06W 3474 4822 052 10398 3,9Ω 0,33W for CDR82x 3412 ©...
  • Page 53 www.freeservicemanuals.info It`s Free 10-4 DISPLAY BOARD KEY left BOARD ELECTRICAL PARTSLIST ELECTRICAL PARTSLIST TRANSISTORS ––––––––––––––––––––––––––––––––––––––––––––––––––––– MISCELLANEOUS 7405 © 4822 130 60511 BC847B ––––––––––––––––––––––––––––––––––––––––––––––––––––– 1480 2422 128 02929 SWITCH, POWER ON/OFF 7406 © 4822 130 60511 BC847B 7407 © 4822 130 60511 BC847B 1481 4822 276 13775...
  • Page 54 www.freeservicemanuals.info It`s Free 10-5 HEADPHONE BOARD ELECTRICAL PARTSLIST MISCELLANEOUS RESISTORS ––––––––––––––––––––––––––––––––––––––––––––––––––––– ––––––––––––––––––––––––––––––––––––––––––––––––––––– 1660 4822 267 31453 HEADPHONE SOCKET 6,3mm 3677 4822 101 21199 POTMETER 2x10KΩ 1661 4822 267 31453 MICROPHONE SOCKET 6,3mm 3678 © 4822 051 30103 10kΩ 0,06W 1662 4822 265 11207 FFC-CON., 6P, SIDE ENTRY 3679 ©...
  • Page 55 www.freeservicemanuals.info It`s Free 10-6 INTERFACE BOARD ELECTRICAL PARTSLIST MISCELLANEOUS RESISTORS ––––––––––––––––––––––––––––––––––––––––––––––––––––– ––––––––––––––––––––––––––––––––––––––––––––––––––––– 1302 4822 265 11515 FFC-CON., 8P, TOP ENTRY 3310 © 4822 051 30151 150Ω 0,06W for CDR82x 1302 4822 267 10731 FFC-CON., 6P, TOP ENTRY 3311 © 4822 051 30479 47Ω...
  • Page 56 www.freeservicemanuals.info It`s Free 10-7 3CDC-LC-CDR ELECTRICAL PARTSLIST MISCELLANEOUS CAPACITORS ––––––––––––––––––––––––––––––––––––––––––––––––––––– ––––––––––––––––––––––––––––––––––––––––––––––––––––– 9305 022 30207 CD Drive VAM2202/07 2860 4822 124 11947 10µF for Double speed 9305 022 30409 CD Drive VAM2204/09 2866 © 4822 126 13751 47nF for Quad speed 4822 361 10753 CAROUSEL MOTOR 2872 ©...
  • Page 57 www.freeservicemanuals.info It`s Free 10-8 3CDC-LC-CDR ELECTRICAL PARTSLIST RESISTORS RESISTORS ––––––––––––––––––––––––––––––––––––––––––––––––––––– ––––––––––––––––––––––––––––––––––––––––––––––––––––– 3779 © 4822 117 11454 820Ω 0,1W 3874 © 4822 051 20008 CHIP JUMPER 0805 3780 © 4822 051 30471 470Ω 0,06W 3878 © 4822 117 11503 220Ω 0,1W 3781 ©...
  • Page 58 www.freeservicemanuals.info It`s Free 10-9 3CDC-LC-CDR ELECTRICAL PARTSLIST INTEGRATED CIRCUITS RESISTORS ––––––––––––––––––––––––––––––––––––––––––––––––––––– ––––––––––––––––––––––––––––––––––––––––––––––––––––– 4853 © 4822 051 20008 CHIP JUMPER 0805 7801 © 4822 209 17286 TZA1024T/N1, HF-AMPLIFIER 4854 © 4822 051 30008 CHIP JUMPER 0603 7802 © 9352 684 20557 SAA7325H/T/M2B, SIGNAL PROCESSOR 4855 ©...

This manual is also suitable for:

Cdr802/00s/01sCdr820/00/17Cdr822/00s/01s

Table of Contents