Table of Contents
Advertisement
2.3 Connecting to Power
Use only the attached power connector for activating the camcorder and
charging the built-in battery.
1.
Connect one end of power connector to USB/Power connector port
on the camcorder. USB port input: DC 5V / 1A.
2.
Plug the other end of the car adapter to the cigarette lighter socket
of your vehicle. Once the vehicle engine is started, the camcorder
automatically turns on. Car charger input: DC 12 / 24V.
Note:
This camcorder shall be installed near the rear view mirror, at the center and top of windshield for
optimal viewing.
11
Advertisement
Table of Contents
