Siemens SN SERIES Instruction Manual

Siemens SN SERIES Instruction Manual

Hide thumbs Also See for SN SERIES:
Table of Contents

Advertisement

Dishwasher
SN.../SX...
en Instruction manual

Advertisement

Table of Contents
loading

Summary of Contents for Siemens SN SERIES

  • Page 1 Dishwasher SN.../SX... en Instruction manual...
  • Page 2 (08@HPX`h)")*)2):)B)J)R 1"1*121:1B1J1R1Z1b1j9"9*929:9B9J...
  • Page 3: Table Of Contents

    Table of contents e n I n s t r u c t i o n m a n u a l Intended use ....5 Water softening system / special salt .
  • Page 4 Additional functions ..32 Cleaning and maintenance ..38 Save time (VarioSpeedPlus) ..32 Overall condition of the machine . . . 38 Half load ..... .32 Special salt and rinse aid .
  • Page 5: Intended Use

    Intended use en Keep children below the age of Intended use 8 years old at a safe distance from the appliance and power This appliance is intended ■ cable. I n t e n d e d u s e for use in the home and domestic environments.
  • Page 6: Delivery

    en Safety instructions If the power cord of this Delivery ■ appliance is damaged, it Check the packaging and must be replaced with a dishwasher immediately for particular power cord. damage caused in transit. To prevent injury, the power Do not switch on a damaged cord may be purchased from appliance, but contact your customer service only.
  • Page 7: In Daily Use

    Safety instructions en Install built-under or In daily use ■ integratable appliances only Read and observe the safety under continuous worktops information and instructions for which have been screwed to use on the packaging for adjacent cupboards to cleaning and rinsing agents. ensure stability.
  • Page 8: Disposal

    en Safety instructions Disposal Warning Risk of explosion! Make redundant appliances Do not add any solvents to the unusable to prevent rinsing compartment. Danger of subsequent accidents. explosion! Dispose of the appliance in an environmentally friendly Warning manner. Risk of scalding! Open the door carefully when Warning the programme is still running.
  • Page 9: Door Lock

    Safety instructions en When opening and closing Activate the child-proof lock ■ the door on an eye-level (door lock) as follows: appliance, ensure that Pull the catch of the children do not become child-proof lock towards jammed or crushed between yourself (1).
  • Page 10: Environmental Protection

    en Environmental protection Deactivate the child-proof lock Environmental (door lock) as follows: protection Press the catch of the child-proof lock to the right Both the packaging of new appliances (1). t e c t i o n E n v i r o n m e n t a l p r o and the old appliances themselves Press the catch of the contain valuable raw materials and...
  • Page 11: Getting To Know Your Appliance

    Getting to know your appliance en Appliance interior Getting to know your 1" Interior light * appliance 1* Cutlery drawer * 12 Top basket Diagrams of the control panel and the 1: Upper spray arm y o u r a p p l i a n c e G e t t i n g t o k n o w interior of the appliance can be found at 1B Tablet collecting tray...
  • Page 12: Time Setting

    en Getting to know your appliance Time setting Keep pressing button > )R until the time setting is indicated on the When the appliance is switched on the display window at the top @. T i m e s e t t i n g for the first time, the time starts at 12:00 Make the setting with setting buttons o’clock.
  • Page 13: Settings

    Getting to know your appliance en Initial start-up settings Factory setting Infotext by pressing Info button { Rinse aid disp. Level 5 Amount of rinse aid affects drying. When using Multitabs, select setting 0. Water connection * Cold water Connection to hot water (40-60°C) or cold water (<40°C) possible.
  • Page 14 en Getting to know your appliance Basic setting Factory setting Infotext by pressing Info button { ExtraDry Improved drying for glasses and plasticware. Water connection * Cold water Connection to hot water (40-60°C) or cold water (<40°C) possible. Eco forecast Show the water and energy consumption.
  • Page 15: Home Connect

    Home Connect en Setting up Home Connect Home Connect You can set your dishwasher by pressing the remote start button }h This dishwasher ist Wi-Fi capable and H o m e C o n n e c t can be remotely controlled via a mobile or proceed as follows: terminal device.
  • Page 16: Network Login

    en Home Connect Network login Connect to App The “Network login” menu option is not The “Connect to App” menu option is available unless you have activated not available unless there was a Wi-Fi. connection to the home network. In the “Network login” menu you can The “Connect to App”...
  • Page 17: Remote Start Button

    1999/5/EC. A detailed R&TTE Declaration of Conformity can be found on the Internet at www.siemens-home.com on the product page of your appliance with the additional documents.
  • Page 18: Water Softening System

    en Water softening system/special salt Adjusting the water softening Water softening system system / special salt The amount of salt dispensed can be set from 0 to 62°E. Salt is not required To ensure good rinsing results, the at the set value 0-8. s y s t e m / s p e c i a l s a W a t e r s o f t e n i n g dishwasher requires soft water, i.e.
  • Page 19: Using Special Salt

    Water softening system/special salt en Using special salt Using detergents with salt component As soon as the low salt indicator P is If combined detergents with a salt lit on the control panel or is requested s a l t c o m p o n e n t D e t e r g e n t w i t h a component are used, special salt can on the front display * )2, salt should...
  • Page 20: Rinse Aid

    en Rinse aid Close the lid. Rinse aid Lid “clicks” into position. Remove overflowed rinse aid with a As soon as the low rinse-aid indicator cloth. R i n s e a i d H is lit on the control panel or is This prevents excessive frothing requested on the front display * )2, during the next rinse cycle.
  • Page 21: Switching Off Rinse Aid Refill Indicator

    Utensils en Switching off rinse aid refill Utensils indicator Not suitable If the use of combined detergents with a U t e n s i l s rinse-aid component impairs the low Cutlery and utensils made of wood. rinse-aid indicator H on the control ■...
  • Page 22: Loading The Dishwasher

    en Utensils Loading the dishwasher Remove large food remnants. It is not necessary to prerinse utensils under running water. Place the utensils so that they are secure and cannot tip – over. all utensils with their openings – face down. parts with curves or indentations –...
  • Page 23: Cutlery Basket

    Utensils en Cutlery basket * Place cutlery, always unsorted with the C u t l e r y b a s k e t tips face down, in the cutlery basket *. To prevent injuries, place long, pointed implements and knives on the knife shelf *.
  • Page 24: Folding Spikes

    en Utensils Small items holder * Adjust the height of the etagere as follows: * Depending on the features of your Position the etagere vertically and S m a l l i t e m s h o l d dishwasher, the upper basket is fitted pull upwards.
  • Page 25: Baking Sheet Spray Head

    Utensils en Baking sheet spray head * Unloading the dishwasher * depending on the features of your To prevent water from dripping off the y h e a d B a k i n g s h e e t s p r a dishwasher upper basket onto the utensils in the Large trays or grilles as well as large...
  • Page 26: Adjusting The Height Of The Basket

    en Utensils Adjusting the height of the basket * * depending on the features of your i g h t o f t h e b a s k A d j u s t i n g t h e h e dishwasher If required, the height of the upper basket 12 can be adjusted to create...
  • Page 27: Detergent

    Detergent en To lift the upper basket; grip the Detergent sides of the upper basket along the upper edge and lift. You can use tablets as well as powder Ensure that both sides of the upper D e t e r g e n t or liquid detergents for dishwashers, but basket are at the same height.
  • Page 28: Adding Detergent

    en Detergent Adding detergent If the utensils are only lightly Tip: soiled, slightly less than the indicated amount of detergent is usually If the detergent dispenser 9: is still adequate. closed, actuate locking bar 9B to Suitable detergents and care products open it.
  • Page 29 Detergent en Even if the rinse-aid and/or salt refill Notes ■ If you want to add more utensils after indicator is lit, the rinse programme ■ the programme has started, do not will run correctly with combined use the tablet collecting tray 1B as detergents.
  • Page 30: Overview Of Programmes

    en Overview of programmes Overview of programmes The max. possible number of programmes is illustrated in this overview. The a m m e s O v e r v i e w o f p r o g r corresponding programmes and their arrangement can be found on the fascia. Type of utensils Type of soiling Programme Possible...
  • Page 31: Programme Selection

    Overview of programmes en Type of utensils Type of soiling Programme Possible Programme sequence additional options sensitive utensils, ñ / ð cutlery, Clean 45° slightly adhesive, Extra dry temperature-sens Intermediate rinse fresh food remnants Shine and Dry Quick wash 45° itive plastic and Final rinse 50°...
  • Page 32: Additional Functions

    en Additional functions Ï intensiveZone * Additional functions Perfect for a mixed load. You can wash i n t e n s i v e Z o n e very soiled pots and pans in the lower * Depending on the features of your i o n s A d d i t i o n a l f u n c t basket together with normally soiled...
  • Page 33: Operating The Appliance

    Operating the appliance en AquaSensor * Operating the * depending on the features of your appliance A q u a S e n s o r dishwasher The Aqua sensor is an optical Programme data measuring device (light barrier) which p l i a n c e O p e r a t i n g t h e a p measures the turbidity of the rinsing...
  • Page 34: Time Display

    en Operating the appliance During the drying phase moisture from amounts of active agents. The energy the rinsing compartment is stored in and water consumption is adjusted the mineral and heat energy accordingly. is released. This released heat energy is blown into the rinsing compartment with extraDry dry air.
  • Page 35: Emotionlight

    Operating the appliance en emotionLight (interior light) * Infolight * * depending on the features of your * depending on the features of your e m o t i o n L i g h t i n f o L i g h t dishwasher dishwasher The interior light 1"...
  • Page 36: Child-Proof Lock

    en Operating the appliance Child-proof lock * Switching the appliance on * depending on the features of your Turn on tap fully. C h i l d - p r o o f l o c k dishwasher Open the door. The dishwasher features an electronic Switch on ON/OFF switch (.
  • Page 37: Time Preselection

    Operating the appliance en Time preselection Switching off the appliance You can delay the start of the Short time after the end of the programme by up to 24 hours. programme: Depending on the setting of the time Open the door. display, the end of programme is Switch off ON/OFF switch (.
  • Page 38: Terminating The Programme

    en Cleaning and maintenance Terminating the programme Cleaning and (Reset) maintenance Open the door. p r o g r a m m e T e r m i n a t i n g t h e Press the START button )* and A regular inspection and maintenance hold for 3 seconds t e n a n c e...
  • Page 39: Special Salt And Rinse Aid

    Cleaning and maintenance en Filters Never use a steam cleaner to clean your dishwasher. The manufacturer The filters 1j keep large foreign is not liable for any consequential objects in the rinsing water away from damage. the pump. hese foreign objects may Regularly wipe the front occasionally block the filters.
  • Page 40: Spray Arms

    en Fault, what to do? Spray arms Fault, what to do? Limescale and contaminants in the rinsing water may block nozzles and Experience has shown that you can F a u l t , w h a t t o d bearings on the spray arms 1: and rectify most faults which occur in daily operation yourself.
  • Page 41: Waste Water Pump

    Fault, what to do? en Waste water pump Check impeller wheel and remove any foreign objects. Large food remnants or foreign objects Place pump cover in the original which were not captured by the filters position (2) and press down until it may block the waste water pump.
  • Page 42: Fault Table

    en Fault, what to do? Fault table Fault Cause Remedial action Error code “:‚‰ is lit. Supply hose kinked. Install supply hose without kinks. Tap turned off. Turn on the tap. Tap jammed or calcified. Turn on the tap. Flow rate must be min. 10 l/min. when water supply is open.
  • Page 43 Fault, what to do? en Fault Cause Remedial action Error code “:ƒ† is lit. Waste water pump blocked or Clean pump and lock cover correctly. cover on the waste water pump is ~ "Waste water pump" on page 41 not locked in position. Error code “:ƒˆ...
  • Page 44 en Fault, what to do? Fault Cause Remedial action Utensils not dry. No or too little rinse aid in the Refill rinse aid. dispenser. Programme selected without Select programme with drying. drying. ~ "Overview of programmes" on page 30 Water collecting in depressions Arrange utensils in a sloping position, on the utensils and cutlery.
  • Page 45 Fault, what to do? en Fault Cause Remedial action Food remnants on the Utensils placed too closely Arrange utensils with adequate clearance utensils. together, utensils basket between them ensuring that the spray jets overfilled. can reach the surface of the utensils. Prevent contact points.
  • Page 46 en Fault, what to do? Fault Cause Remedial action Detergent residue. Detergent dispenser cover 9: Utensils must not be placed above the blocked by utensils and therefore tablet collecting tray 1B. These may does not open fully. block the lid of the detergent dispenser and prevent it from opening fully.
  • Page 47 Fault, what to do? en Fault Cause Remedial action White, stubborn coatings; Detergent substances are Change detergent brand. limescale on the utensils, deposited. These coatings cannot Clean appliance mechanically. container or door. usually be removed with chemicals (appliance cleaner, ...). Hardness range incorrectly set or Set water softening system according to water hardness greater than 8.9...
  • Page 48 en Fault, what to do? Fault Cause Remedial action Plastic parts discoloured. Too low rinsing temperature. Select programme with higher washing temperature. Utensils precleaned too intensely; Do not prerinse utensils. Remove only sensors therefore decide on large food remnants. weak programme sequence. Increase sensitivity of the sensors.
  • Page 49 Fault, what to do? en Fault Cause Remedial action Appliance cannot be Malfunction. Disconnect appliance from the power switched on or operated. supply; pull out the mains plug or switch off the fuse. Wait at least 5 seconds, then connect the appliance to the power supply.
  • Page 50 en Fault, what to do? Fault Cause Remedial action Knocking or rattling noise. Spray arm strikes the utensils, Position utensils so that the spray arms do utensils not positioned correctly. not strike the utensils. If there is a low load, the water Load the appliance with more utensils or jets strike the washing tank distribute the utensils more evenly in the...
  • Page 51: Customer Service

    Customer service en Customer service Installation and connection If you are unable to rectify the fault, C u s t o m e r s e r v i c e please contact your customer service. The dishwasher must be connected We will always find an appropriate c o n n e c t i o n I n s t a l l a t i o n a n d...
  • Page 52: Delivery

    en Installation and connection Delivery Installation Your dishwasher has been checked The required installation dimensions thoroughly in the factory to ensure that can be found in the installation it is in working order. This may cause instructions. Level the appliance with small water stains.
  • Page 53: Drinking Water Connection

    Installation and connection en Drinking water connection To change the setting: Open the door. Switch on ON/OFF switch (. Fasten the drinking water connection Press Info button {8 for 3 to the tap according seconds until the following text is to the installation instructions using indicated on the display window at the enclosed parts.
  • Page 54: Removal

    en Installation and connection Use only a residual current operated Close the door. ■ circuit-breaker which features the Open the door after approx. 1 symbol ‚. Only this extension minute. guarantees compliance with The display window at the top @ the currently valid regulations.
  • Page 56 *9001177929* 9001177929 (9601_*) 642 TW...

This manual is also suitable for:

SxxxxSnxxxSx series

Table of Contents