System Setting - Sony BVM-X300 Operating Instructions Manual
Professional video monitor
trimaster el 4k
Hide thumbs
Also See for BVM-X300:
- Operating instructions manual (37 pages) ,
- Operating instructions manual (32 pages)
Table of Contents
Advertisement
[System Setting]
Submenu
Setting
[LED Brightness]
Selects the brightness of the indicator's
LED of the buttons, power switch, etc.
[High]: The level of the LED
[Middle]: The level of the LED
[Low]: The level of the LED
Note
The level of the character's brightness
which shows the button name is [High]
or [Low]. When [Middle] is selected,
the brightness is set to the same as
[Low].
[Format Display]
Selects the display mode of the signal
format.
[Auto]: The format is displayed for
[Off]: The display is hidden.
brightness becomes high.
brightness becomes medium.
brightness becomes low.
about five seconds when the
input of the signal starts.
Submenu
Setting
[Flicker Free]
Set this to [On] to enable view images
without flicker.
An OLED panel can provide superior
video responsiveness and scan driving,
reproducing images with little contour
or afterimage. However, scan driving
can cause flicker when input signals
have a low vertical frequency (24P/PsF,
50i, etc.). Set [Flicker Free] to [On] to
greatly reduce this phenomenon.
With this mode set to on, quick-moving
images may exhibit contours or an
afterimage.
Note
In the HDR display, [Flicker Free]
cannot be selected. [On] is always set
for signals of vertical frequency 24 Hz,
25 Hz, 48 Hz, and 50Hz. [Off] is always
set for signals of 30 Hz and 60 Hz.
For details on the HDR (High Dynamic
Range) display, see page 23.
[Interlace]
The interlace signal is displayed as the
interlace picture by inserting the black
line without I/P conversion processing.
A picture faithful to the original signal
with the same feel as a CRT is gained.
[On]: Interlaced video is displayed.
[Off]: The progressive signals by I/P
conversion processing are
displayed.
Note
The brightness of HDR display is
reduced by half when the interlace
display is selected.
Except for HDR display, the normal
brightness is set by increasing the value
of gain. However, the maximum
brightness is reduced by half.
21
Adjustment Using the Menus
Hide quick links:
Advertisement
Table of Contents
