Table of Contents
Advertisement
Part Names and Functions
Headset
Camera
A
Captures images and movies. Remove the protective film before
using the camera. You can adjust the direction of the camera
vertically.
Camera indicator
B
Flashes while the camera is operating.
Light sensor
C
Senses the brightness of your surroundings and automatically
adjusts the brightness of the screen.
Head pad
D
Fits against your forehead when wearing the headset. The head
pad is equipped with a built-in sensor to detect the position
and direction of the product.
Lens
E
Displays images. When you are not viewing images, you can
slide up the lens to the head pad.
➡ "Viewing Images Using the Headset" p. 12
6
Lens justifier
F
You can adjust the position of the lens vertically. Make sure the
lens is level when adjusting.
Head band
G
Secures the headset on to your head. You can adjust the length
to fit the size of your head (head circumference: 560 to 640
mm).
Cable securer
H
Secures cables when wearing the headset.
Screw holes to secure the shade/protective shield/
I
lens holder
Install the shade/protective shield using the exterior screw
holes. Install the lens holder using the interior screw holes.
➡ "Installing the Shade/Protective Shield/Lens Holder" p. 9
Inner pad (B)
J
If the headset feels tight, replace this with inner pad A or C. The
headset feels loose if you attach a smaller inner pad.
➡ "Replacing the Inner Pad" p. 9
Advertisement
Table of Contents
