General information
Warning and caution labels
The following labels are attached to the Helm Master control system components as shown
below.
If these labels are damaged or missing, contact your Yamaha dealer for replacements.
TIP:
These components are installed on the boat in a location close to the stern. The installation
position differs depending on the boat. For the proper installation position on your boat, con-
tact a boat manufacturer or a Yamaha dealer.
1
CAN 1
12V
RFU 1
Setting Standards for Safer Boating
WARNING
Avoid loss of steering control which could result in an accident with severe
injury or death. Follow all installation, use, and maintenance instructions
carefully.
WARNING
Improper installation may cause loss of boat control.
Follow Rigging Manual carefully.
• Secure all connections.
• Cap all unused connectors.
• Secure cables to tabs with cable ties.
1
2
CAN 1
Avoid loss of steering control which could result in an
R
accident with severe injury or death. Follow all installation,
use, and maintenance instructions carefully.
ISO 25197, lgnition Protected
2
WARNING
Improper installation may cause loss of boat control.
Follow Rigging Manual carefully.
Cap all unused connectors.
Secure cables to tabs with
cable ties.
CAN 3
WARNING
SAE J1171, Patent Pending
Secure all connections.
CAN 2
RFU 2
6