G Misfeed In The Duplex Bypass/Inverter Unit And Duplex; Module/2 X 500 Sheet Paper Drawer; Misfeed In The Duplex Bypass/Inverter Unit And Duplex Module/2 X 500 Sheet Paper Drawer - Sharp AR-C260P Operation Manual
Hide thumbs
Also See for AR-C260P:
- Setup manual (24 pages) ,
- Key operator's manual (33 pages) ,
- Operation manual (41 pages)
Table of Contents
Advertisement
Misfeed in the duplex bypass/inverter unit and duplex
module/2 x 500 sheet paper drawer
NOTE
Paper misfed from a paper tray may be extending out of the tray into the right side cover area. If the tray is drawn
out of the machine in this case, the paper may tear and become difficult to remove. To prevent this from happening,
always open the right side cover first and remove the misfed paper if it is extending into that area.
Perform steps 1 and 2 of "Misfeed in the
1
stand/1 x 500 sheet paper drawer" on the
previous page.
2
Open the upper cover of the duplex
bypass/inverter unit.
3
Remove the misfeed from the upper part of
the duplex bypass/inverter unit.
Close the upper cover of the duplex
4
bypass/inverter unit.
5
Lift the exit tray if installed and open the
cover of the duplex bypass/inverter unit.
Hold the upper cover of
the
unit
open
while
removing
the
misfed
paper.
Remove the misfed paper.
6
7
Close
the
cover
bypass/inverter unit and return the exit
tray to its original position.
Remove the misfed paper from the bottom
8
of the duplex bypass/inverter unit.
9
Pull out the duplex module of the duplex
module/2 x 500 sheet paper drawer.
MISFEED REMOVAL
While holding the exit
tray up, remove the
misfed paper as shown
in the illustration. Be
careful not to tear the
misfed
paper
during
removal.
of
the
duplex
Gently
remove
the
misfed paper from the
bottom of the duplex
bypass/inverter unit as
shown in the illustration,
taking care not to tear
the paper.
Make sure that there is
no misfed paper in the
machine.
2-27
2
Advertisement
Chapters
Table of Contents
