Yamaha YVC-1000 User Manual page 8

Microphone & speaker system

Hide thumbs Also See for YVC-1000:

1. Connect the YVC-1000 audio input terminal (RCA pin) and the XD-V35 receiver with a commercially

available audio cable.

Before connecting the XD-V35 receiver, turn off YVC-1000.

Prepare a proper audio cable for the XD-V35 receiver's connecting terminal.

Unbalanced 1/4 inch audio output connector: "RCA pin plug↔PHONE plug (monaural)" audio cable

Balanced XLR audio output: "RCA pin plug↔XLR (Female)" audio cable

Memo

Both of the YVC-1000 audio input terminals (L and R) are connectable.



You can use the external microphone simultaneously with the microphone supplied with YVC-1000, or



the optional microphone (YVC-MIC1000EX). Also, you can use it in combination with an external

speaker.

Step 2: How to set

To connect the XD-V35 to YVC-1000 for use, you have to change the YVC-1000 settings. Use the

application software "YVC-1000 Configurator" to change the settings.

Memo

This manual explains how to change the settings with a PC. Please refer to the YVC-1000 user's manual when

checking difference in operation between a PC and a Mac.

1. Download "YVC-1000_Configurator_XXX.zip" from the following website, and decompress the file.

http://www.yamaha.com/products/en/communication/download/

Memo

"XXX" in the file name indicates the version of YVC-1000 Configurator.

2. Connect YVC-1000 and the PC with the supplied USB cable.

3. Double-click "YVC-1000 Configurator.exe" in the decompressed folder.

"YVC-1000 Configurator" starts up. At the initial startup, the "YVC-1000 Licensing Agreement" dialogue

appears. Read the information carefully, then select "Accept all terms of the license agreement" and

click "OK."

Memo

Also, when you re-download the latest version of "YVC-1000 Configurator," the "YVC-1000 Licensing

Agreement" dialogue appears at the initial startup.