Toro 30412 Groundsmaster 4000-D Operator's Manual page 31

Traction unit

Hide thumbs Also See for 30412 Groundsmaster 4000-D:

Table of Contents

lush and dense grass, you may have to raise the

height-of-cut to the next setting.

Mow at Proper Intervals

Under most normal conditions you will need to mow

approximately every 4-5 days. But remember, grass

grows at different rates at different times. This means

that in order to maintain the same height-of-cut, which

is a good practice, you will need to cut more frequently

in early spring; as the grass growth rate slows in mid

summer, cut only every 8-10 days. If you are unable to

mow for an extended period due to weather conditions

or other reasons, mow first with the height-of-cut at a

high level; then mow again 2-3 days later with a lower

height setting.

Transporting

Use the transport latches when transporting over long

distances, rough terrain, or when trailering.

After Operating

To ensure optimum performance, clean the underside

of the mower housing after each use. If residue is

allowed to build up in the mower housing, cutting

performance will decrease.

Cutting Unit Pitch

We recommend a blade pitch of 1/4 inch (6 mm). A

pitch larger than 1/4 inch (6 mm) will result in less

power required, larger clippings, and a poorer quality

of cut. A pitch less than 1/4 inch (6 mm) will result

in more power required, smaller clippings and a better

quality of cut.

Table of Contents

Show Quick Links

Table of Contents

30412