Hide thumbs Also See for SD-P1200:

Advertisement

810-200339
FILE
NO.
SERVICE
MANUAL
DVD
VIDEO PLAYER
SD-P1200
DOCUMENT CREATED IN JAPAN, May, 2003

Advertisement

Table of Contents
loading

Summary of Contents for Toshiba SD-P1200

  • Page 1 810-200339 FILE SERVICE MANUAL VIDEO PLAYER SD-P1200 DOCUMENT CREATED IN JAPAN, May, 2003...
  • Page 2: Laser Beam Caution Label

    LASER BEAM CAUTION LABEL When the power supply is being turned on, you may not remove this laser cautions label. If it removes, radiation of laser may be received. PREPARATION OF SERVICING Pickup Head consists of a laser diode that is very susceptible to external static electrocity. Although it operates properly after replacement, if it was subject to electrostatic discharge during replacement, its life might be shortened.
  • Page 3: Safty Precautions

    SAFTY NOTICE SAFTY PRECAUTIONS LEAKAGE CURRENT CHECK Plug the AC line cord directly into a 120V AC outlet (do Measure the AC voltage across the 1500 resistor. not use an isolation transformer for this check). Use an The test must be conducted with the AC switch on and AC voltmeter, having 5000 per volt or more sensitivity.
  • Page 6: Troubleshooting

    1. Troubleshooting 1. No power when turned on. 2. The initial screen is not displayed on the LCD. 3. The DVD drive does not work. 4. The operation of the DVD player stops at initializing display. 5. Image output stops during the operation. 6.
  • Page 7 1.2 The initial screen is not displayed on the LCD. If the initial screen is not displayed on the LCD, check the following items. (1) Check the LED on the front If the LED does not light, proceed to 1.1. (2) Check the backlight If the backlight does not light up, separate.
  • Page 8 1.3 The DVD drive does not work. When the DVD drive does not work after the power is turned on, check the following items and repair or replace the defective parts. (1) Press the DISC cover switch at the center of the DVD player and turn on the power.
  • Page 9 1.5 Image output stops during the operation. If the image output form the media in the DVD player stops during the operation, replace the DVD drive. 1.6 No sound or abnormal sound comes out from the speakers in the DVD player. If no sound comes out form the speakers in the DVD player, check the following: (1) Check for moving images on the LCD screen Check whether or not the move of image stops in halfway.
  • Page 16 SD-P1200 CHASSIS ASSEMBLY TOSHIBA...
  • Page 17 PARTS LIST Location TOSHIBA Part Vendor's Part Description AH300017 b20059 slide valve AH300018 b20060 port (slide valve) AH300019 b20048 spring (slide valve) AH300008 b20071 LCD cover AH300009 b8497 stylobate AH300010 b20091 cushion, LCD (PVC) AH300009 b8497 stylobate AH300009 b8497 stylobate...
  • Page 18: Disassembling And Reassembling Procedure

    DISASSEMBLING and REASSEMBLING PROCEDURE This section explains how to disassemble Start with disconnecting the AC adapter. SD-P1200, replace parts and reassemble. It Please install Apple Quick Time 4 or more to see may not be necessary to remove all the parts the following movies.
  • Page 19 TOSHIBA CORPORATION 1-1, SHIBAURA 1-CHOME, MINATO-KU, TOKYO 105-8001, JAPAN...

Table of Contents