Samsung 4000 User Manual page 2

Series 4; series 5

Hide thumbs Also See for 4000:

User manual (228 pages)

Quick start manual (16 pages)

Quick setup manual (2 pages)

page of 2

/ 2
Bookmarks

Program Rating Lock

Boot Logo

The Program Rating Lock feature automatically locks out programs

Enable/disable displaying the logo while the TV starts up.

that are deemed inappropriate for children. The user must enter a PIN

Eco Solution

(personal identification number) before any of the Program Rating Lock

restrictions are set up or changed.

■ Energy Saving: This adjust the brightness of the TV in order to

✎

Program Rating Lock is not available in HDMI or Component

reduce power consumption. If you select Picture Off, the screen is

mode.

turned off, but the sound remains on. Press any button except volume

✎

The default PIN number of a new TV set is "0-0-0-0".

button to turn on the screen.

■ Program Rating Lock: You can block rated TV Programs.

■ No Signal Power Off : Sets how quickly the TV switches to standby

■ TV Parental Guidelines: You can block TV programs depending on

mode, if no picture is being received.

their rating. This function allows you to control what your children are

✎

Disabled when the PC is in power saving mode.

watching.

■ Auto Power Off: The TV will be automatically turned off when no user

■ MPAA Rating: You can block movies depending on their MPAA

operation is received for 4 hours.

rating. The Motion Picture Association of America (MPAA) has

Auto Protection Time

implemented a rating system that provides parents or guardians with

advanced information on which films are appropriate for children.

If the screen remains idle with a still image for a certain period of

■ Canadian English: You can block TV programs depending on their

time defined by the user, the screen saver is activated to prevent the

Anglophone Canadian.

formation of ghost images on the screen.

■ Canadian French: You can block TV programs depending on their

French Canadian rating.

Support Menu

■ Downloadable U.S. Rating: Parental restriction information can be

used while watching DTV channels.

■ Change PIN: The Change PIN screen will appear. Choose any 4 digits

Self Diagnosis

for your PIN and enter it in Enter New PIN. Re-enter the same 4 digits

in Confirm New PIN. When the Change PIN screen disappears, press

■ Picture Test: Use to check for picture problems. If the problem

the OK button. The TV has memorized your new PIN.

continues to occur, check the color pattern.

✎

If you forget the PIN, press the remote-control buttons in the

■ Sound Test: Use the built-in melody sound to check for sound

following sequence, which resets the pin to "0-0-0-0" :

POWER

(off)

problems.

→

MUTE

→ 8 → 2 → 4 →

POWER

(on)

■ Signal Strength: (digital channels only) An HD channel's reception

Caption

quality is either perfect or the channels are unavailable. Adjust your

antenna to increase signal strength.

(On-Screen Text Messages)

■ Reset: Reset all settings to the factory defaults.

■ Caption: You can switch the caption function on or off. If captions are

✎

The PIN input screen appears before the setup screen.

not available, they will not be displayed on the screen.

✎

Enter your 4-digit PIN. Change the PIN using the Change PIN

✎

The Caption feature does not work in Component or HDMI

option.

mode.

Software Upgrade

■ Caption Mode: You can select the desired caption mode.

Default / CC1~CC4 / Text1~Text4: (analog channels only) The

Software Upgrade can be performed by downloading the latest

Analog Caption function operates in either analog TV channel mode

firmware from samsung.com to a USB memory device.

or when a signal is supplied from an external device to the TV.

Use Mode

(Depending on the broadcasting signal, the Analog Caption function

may or may not work with digital channels.)

You can turn the TV into a display model for retail environments by

Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (digital

setting Use Mode to Store Demo.

channels only) The Digital Captions function works with digital

✎

For all other uses, select Home Use.

channels.

✎

With Store Demo, some functions are disabled, and the TV

✎

Service1~6 may not be available in digital caption mode

automatically resets itself after a preset amount of time.

depending on the broadcast.

■ Digital Caption Options: (digital channels only)

HD Connection Guide

Size: Options include Default, Small, Standard and Large. The default

Refer to this information when connecting external devices to the TV.

is Standard.

Font Style: Options include Default and Styles 0 to 7. The default is

Contact Samsung

Style 0.

View this information when your TV does not work properly or when you

Foreground Color: Options include Default, White, Black, Red,

want to upgrade the software. You can find information regarding our call

Green, Blue, Yellow, Magenta and Cyan.

centers and how to download products and software.

You can change the color of the letter. The default is White.

Background Color: Options include Default, White, Black, Red,

Media Play

Green, Blue, Yellow, Magenta and Cyan. You can change the

background color of the caption. The default is Black.

Foreground Opacity: This adjusts the opacity of text. Options include

Enjoy photos, music and/or movie files saved on a USB

Default, Transparent, Translucent, Solid and Flashing.

Mass Storage Class (MSC) device.

Background Opacity: This adjusts the opacity of the caption

background. Options include Default, Transparent, Translucent, Solid

and Flashing.

Return to Default: This option sets each Size, Font Style, Foreground

Color, Background Color, Foreground Opacity and Background

Opacity to its default.

Connecting a USB Device

✎

Digital Caption Options are available only when Default and

1. Turn on your TV.

Service1~Service6 can be selected in Caption Mode.

2. Connect a USB device containing photo, music and/or movie files to

✎

The Foreground and Background cannot be set to have the same

the

USB

jack on the side of the TV.

color.

3. When USB is connected to the TV, you can select Media Play (USB)

in Applications menu.

- 9 -

Troubleshooting

If the TV seems to have a problem, first review this list of possible problems and solutions. If none of these troubleshooting tips apply, visit samsung.

com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG.

Problem

Possible Solution

Flickering and Dimming

If your Samsung Television is flickering or dimming sporadically, you may need to disable some of its energy efficient features

like the Energy Saving feature. If you follow below step with your remote, you can turn these features off or on.

y Energy Saving :

→ Setup → Eco Solution → Energy Saving → Select Settings

Component Connections /

If you find that the color on your Samsung television's screen is not correct or black and White, first run a Self Diagnosis on

the TV to make sure there are no device issues.

Screen Color

y Self Diagnosis :

→ Support → Self Diagnosis → Picture Test

If the test is ok, try making sure:

y Your connections are all consistent. For example, if you've used the AV In jack on your TV, make sure you have used the AV

Out jack on your video source.

y Try making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled Pb, Pr, and

Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the video source to the blue Pb

jack on the TV, the red Pr jack on the source to the red Pr jack on the TV.

Screen Brightness

If you find that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings you

should check before calling for a repair.

y Backlight, Contrast, Brightness, Sharpness, Color, Tint (G/R) and so on. Go in to "Picture" on user Menu then try

adjusting options mentioned above.

Unwanted Powering off

If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco friendly No

Signal Power Off feature.

First make sure you Sleep Timer is not accidentally set. The sleep timer allows you the comfort of falling asleep with the TV

still on but, turns it off after a certain period of time so as not to waste energy.

y Sleep Timer :

→ Setup → Time → Sleep Timer

If the Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Off feature.

→ Setup → Eco Solution → No Signal Power Off

y No Signal Power Off :

y Auto Power Off :

→ Setup → Eco Solution → Auto Power Off

Trouble Powering On

Before Turn on check red light on the right or left bottom of your TV. Press power on button on TV or remote and it

will blink about 5 times before turning on.

If you find that you are having trouble powering on your Samsung television, there are a number of things to check before

making a call to the service department.

y If you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you press the

power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your keyboard or move the

mouse. Then try turning your TV on.

If you're sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If you have

a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a signal. To test the

signal output of your cable or satellite box, press the guide or info button on the cable or satellite box remote control. If the

screen displays the guide or info data, the problem is caused by the box.

Stand Assembly

If you have any trouble to assemble the stand though you refer to "Install the Stand" mentioned at separate guide.

Cannot find channel

Re-run plug and play.

Poor picture

First, perform the Picture Test and to see if your TV is properly displaying the test image.

Go to

- Support - Self Diagnosis - Picture Test

If the test image is properly displayed, the poor picture may be caused by the source or signal.

The TV image does not look as good as it

If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to deliver HD (high

did in the store.

definition) picture quality.

Cable/Satellite subscribers: Try HD channels from the channel line up.

Air/Cable Antenna connection: Try HD channels after performing Auto program.

✎

Many HD channels are up scaled from SD(Standard Definition) contents.

y Adjust the Cable/Set top box video output resolution to 1080i or 720p.

The picture is distorted: macroblock error,

y Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and action

small block, dots, pixelization.

movies.

y A weak signal can cause picture distortion. This is not a TV problem.

y Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.

Color is wrong or missing.

If you're using a component connection, make sure the component cables are connected to the correct jacks. Incorrect or

loose connections may cause color problems or a blank screen.

There is poor color or brightness.

y Adjust the Picture options in the TV menu. (Go to Picture Mode / Color / Brightness / Sharpness)

y Adjust the Energy Saving option in the TV menu. (Go to

- Setup - Eco Solution - Energy Saving)

y Try resetting the picture to view the default picture setting. (Go to

- Picture - Picture Reset)

There is a dotted line on the edge of the

y If the picture size is set to Screen Fit, change it to 16:9.

screen.

y Change the cable/satellite box resolution.

- 13 -

Videos

❑ Using the Media Play Menu

1. Press the

button. Press the ▲ or ▼ button to select

1. Press the ◄/► buttons to select Videos, then press the ENTERE

Applications, then press the ENTERE button.

button in the Media Play menu.

2. Press the ▲ or ▼ button to select Media Play (USB), then press the

2. Press the ◄/►/▲/▼ buttons to select the desired video in the file

ENTERE button.

list.

3. Press the ◄ or ► button to select an icon (Videos, Music, Photos,

3. Press the ENTERE button or � (Play) button.

Settings), then press the ENTERE button.

The selected file is displayed on the top with its playing time.

✎

It might not work properly with unlicensed multimedia files.

If video time information is unknown, playing time and the progress

✎

Need-to-Know List before using Media Play (USB)

bar are not displayed.

Supported file systems are FAT and NTFS.

During video playback, you can search using the ◄/► buttons.

Certain types of USB Digital camera and audio devices may not

✎

In this mode, you can play movie clips contained in a game, but you

be compatible with this TV.

cannot play the game itself.

Media Play only supports USB Mass Storage Class (MSC)

y Supported Subtitle Formats

devices. MSC is a Mass Storage Class Bulk-Only Transport

External

device. Examples of MSC are Thumb drives and Flash Card

Readers. Devices should be connected directly to the TV's USB

Name

port. USB HDD is not supported.

MPEG-4 timed text

Before connecting your device to the TV, please back up your files

to prevent them from damage or loss of data. SAMSUNG is not

responsible for any data file damage or data loss.

SubRip

A USB device that requires high power (more than 0.5A) may not

SubViewer

be supported.

Micro DVD

Do not disconnect the USB device while it is loading.

The higher the resolution of the image, the longer it takes to

SubStation Alpha

display on the screen.

Advanced SubStation Alpha

The maximum supported JPEG resolution is 15360 x 8640 pixels.

Internal

If a file is corrupted or the TV does not support the file type, the

"Not Supported File Format" message appears.

Name

The TV cannot play MP3 files with DRM that have been

Xsub

downloaded from a for-pay site. Digital Rights Management

(DRM) is a technology that supports the creation, distribution,

SubStation Alpha

and management of digital content in an integrated and

Advanced SubStation Alpha

comprehensive way, including protecting the rights and interests

of content providers, preventing illegal copying of contents, and

SubRip

managing billings and settlements.

MPEG-4 Timed text

PTP device is not supported.

y Supported Video Formats

If an over-power warning message is displayed while you are

connecting or using a USB device, the device may not be

File

recognized or may malfunction.

Container

Extension

If the TV has no input during the time set in Auto Protection

Time, the Screensaver will run.

*.avi

The power-saving mode of some external hard disk drives may be

*.mkv

released automatically when your connect them to the TV.

*.asf

If you use a USB extension cable, the TV may not recognize the

*.wmv

USB device or may not be able to read the files on the device.

AVI

*.mp4

MKV

If a USB device connected to the TV is not recognized, the list of files on

*.mov

ASF

the device is corrupted, or a file in the list is not played, connect the USB

*.3gp

MP4

device to a PC, format the device, and check the connection.

*.vro

3GP

*.mpg

MOV

If a file you deleted from the PC is still found when you run Media

*.mpeg

FLV

POWER

Play, use the "Empty the Recycle Bin" function on the PC to

*.ts

permanently delete the file.

VRO

*.tp

VOB

Photos only supports sequential jpeg format.

*.trp

The scene search and thumbnail functions are not supported in

*.mov

the Videos.

*.flv

If the number of files and folders saved on a USB storage device is

*.vob

approximately over 4000, the files and folders may not appear and

*.svi

some folders may not be opened.

*.divx

The maximum displayed number of files, including sub folders, in

*.webm

WebM

one folder of USB storage device is 2000.

The media may not be playing smoothly when using the device

MEDIA.P

lower than USB 2.0.

- 10 -

The picture is black and white.

If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the TV.

When changing channels, the picture

y If connected to a cable box, please try to reset it. (Reconnect the AC cord and wait until the cable box reboots. It may take

freezes or is distorted or delayed.

up to 20 minutes)

y Set the output resolution of the cable box to 1080i or 720p.

Sound Problem

First of all, please perform the Sound Test to confirm that your TV audio is properly operating.

(Go to

- Support - Self Diagnosis - Sound Test)

If the audio is OK, the sound problem may caused by the source or signal.

There is no sound or the sound is too low at

Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV.

maximum volume.

The picture is good but there is no sound.

y If you are using an external device, check the device's audio output option (ex. you may need to change your cable box's

audio option to HDMI when you have a HDMI connected to your TV).

y Reboot the connected device by reconnecting the device's power cable.

The speakers are making an inappropriate

y Check the cable connections. Make sure a video cable is not connected to an audio input.

noise.

y For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.

y Perform the Sound Test as explained above.

No Picture, No Video

The TV will not turn on.

y Make sure the AC power cord is securely plugged into the wall outlet and the TV.

y Make sure the wall outlet is working.

y Try pressing the

POWER

button on the TV to make sure the problem is not the remote.

If the TV turns on, refer to 'Remote control does not work' below.

The TV turns off automatically.

y Ensure the Sleep Timer is set to Off in the Time menu.

y If your PC is connected to the TV, check your PC power settings.

y Make sure the AC power cord is plugged in securely to the wall outlet and the TV.

y When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes if there

is no signal.

There is no picture/video.

y Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).

y Set your external device's (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For

example, if an external device's output is HDMI, it should be connected to an HDMI input on the TV.

y Make sure your connected devices are powered on.

y Be sure to select the TV's correct source by pressing the

SOURCE

y Reboot the connected device by reconnecting the device's power cable.

RF(Cable/Antenna) Connection

The TV is not receiving all channels.

y Make sure the coaxial cable is connected securely.

y Please try Auto Program to add available channels to the channel list.

go to

- Channel - Auto Program then select Auto and make sure the correct Cable TV signal type is set in the

menu. There are 3 options. (STD, HRC and IRC)

y Verify the antenna is positioned correctly.

No Caption on digital channels.

y Check the Caption Setup menu. Try changing Caption Mode Service1 to CC1.

y Some channels may not have caption data.

The picture is distorted: macroblock, error,

y Compression of video contents may cause picture distortion. Especially on fast moving pictures such as sports and action

small block, dots, pixelization.

movies.

y A weak signal can cause picture distortion. This is not a TV problem.

Others

Purple/green rolling horizontal bars and

Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the set-top-box has

buzzing noise from the TV speakers with

a grounding issue. Replace the Component video cables with an HDMI connection.

Component cable connection.

The picture will not display in full screen.

y HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.

y Black bars on the Top & Bottom will be shown on movies that have aspect ratios different from your TV.

y Adjust the picture size option on your external device or change the TV to full screen.

The remote control does not work.

y Replace the remote control batteries with correct polarity (+/–).

y Clean the transmission window located on the top of the remote control.

y Try pointing the remote directly at the TV from 5~6 feet away.

The cable/set top box remote control

Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for the

does not turn the TV on or off, or adjust

SAMSUNG TV code.

the volume.

A "Mode Not Supported" message

Check the supported resolution of the TV and adjust the external device's output resolution accordingly. Refer to resolution

appears.

settings in this manual.

Caption on the TV menu is greyed out.

y You cannot select Caption in the TV menu when watching content from a device connected via HDMI or Component.

y Caption must be activated on the external device.

There is a plastic smell from the TV.

This smell is normal and will dissipate over time.

- 14-

Other Restrictions

Codecs may not function properly if there is a problem with the content.

Video content does not play or does not play correctly if there is an

error in the content or container.

Sound or video may not work if they have standard bit rates/frame

rates above the TV's compatibility ratings.

If the Index Table is has an error, the Seek (Jump) function will not work.

When playing video over a network connection, the video may not play

smoothly because of data transmission speeds.

Some USB/digital camera devices may not be compatible with the TV.

While the TV is playing a video at the bit rate of 10 Mbps or higher, the

menu screens may be displayed slowly.

Video Decoder

Supports up to H.264, Level 4.1

File extension

H.264 FMO / ASO / RS, VC1 / AP L4 are not supported.

.ttxt

GMC 2 or above is not supported.

SAMI

.smi

Audio Decoder

.srt

WMA 10 Pro supports up to 5.1 channels. Supports up to the M2

.sub

profile. WMA lossless audio is not supported.

.sub or .txt

QCELP and AMR NB/WB are not supported.

.ssa

Vorbis is supported for up to 2 channels.

.ass

Dolby Digital Plus is supported for up to 5.1 channels.

The DTS LBR codec is only available for MKV / MP4 /TS containers.

Container

Format

Music

AVI

Picture Format

1. Press the ◄/► buttons to select Music, then press the ENTERE

MKV

Text Format

button in the Media Play menu.

MKV

Text Format

2. Press the ◄/►/▲/▼ buttons to select the desired Music in the file

MKV

Text Format

list.

3. Press the ENTERE button or

(Play) button.

MP4

Text Format

✎

During music playback, you can search using the ◄/► buttons.

✎

(REW) and

(FF) buttons do not function during play.

✎

Only displays the files with MP3 file extensions. Other file extensions

Frame

Bit rate

Audio

Video Codec

Resolution

rate(fps)

(Mbps)

Codec

are not displayed, even if they are saved on the same USB device.

✎

If the sound is abnormal when playing MP3 files, adjust the

Motion JPEG

640x480

Equalizer in the Sound menu. (An over-modulated MP3 file may

H.264 BP/

cause a sound problem.)

MP/HP

Photos

H. 264 BP /

AC3

MP / HP

LPCM

1. Press the ◄/► buttons to select Photos, then press the ENTERE

Divx 3.11 / 4

ADPCM

button in the Media Play menu.

/ 5 / 6

(IMA, MS)

2. Press the ◄/►/▲/▼ buttons to select the desired photo in the file

MPEG4 SP/

AAC

list.

ASP

HE-AAC

MAX 30

3. Press the ENTERE button or

(Play) button.

Window

1920x1080

WMA

✎

NOTE

Media Video

DD+

v9(VC1)

While a photo list is displayed, press the

(Play) / ENTERE

MPEG(MP3)

button on the remote control to start the slide show.

DTS (Core ,

All files in the file list section will be displayed in the slide show.

LBR)

MPEG2

G.711(A-

During the slide show, files are displayed in order.

Law, μ-Law)

During the slide show, you can adjust the slide show speed using

(REW) or

(FF) button.

You can move to other file using the ◄/► buttons.

MPEG1

Supported Photo Formats

VP8

1920x1080

6~30

Vorbis

Image

Photo

Resolution

Base-line

15360 x 8704

JPEG

Progressive

1024 x 768

TV Signal Strength is unavailable in the Self

This function is only available for digital channels from an Antenna / RF / Coax connection.

Diagnosis Test menu.

TV is tilted to the right or left side.

Remove the stand base from the TV and reassemble it.

The Channel menu is greyed out

The Channel menu is only available when you select the TV source.

(unavailable).

Your settings are lost after 30 minutes or

If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from Store Demo

every time the TV is turned off.

mode to Home Use mode using the Plug & Play procedure. Press the

Setup → Plug & Play → ENTERE.

You have intermittent loss of audio or video.

Check the cable connections and reconnect them.

Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long

term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.

You see small particles when you look

This is part of the product's design and is not a defect.

closely at the edge of the frame of the TV.

POP (TV's internal banner ad) appears on

Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup).

the screen.

✎

This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or

dark pixels on the screen. These pixels will have no impact on the performance of the product.

✎

Watch these troubleshooting on video at www.samsung.com/spsn.

✎

Some functions and pictures shown in this manual are available on specific models only.

✎

You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com → Support → Downloads) by USB.

Storage and Maintenance

✎

If you attached some stickers on the TV screen, it remains some debris after removing the sticker. Please clean it to watch TV.

✎

The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using a soft cloth to

prevent scratches.

Do not spray water directly onto the

product. Any liquid that goes into the

product may cause a failure, fire, or electric

button on the remote control.

shock.

License

This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.

To play purchased DivX movies, first register your device at vod.divx.com. Find your registration code in the DivX VOD

section of your device setup menu.

DivX Certified® to play DivX® video up to HD 1080p, including premium content.

DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license.

Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274.

This device supports DivX Plus Streaming® for enjoying HD movies and TV shows with advanced features (multi-language

subtitles, multiple audio tracks, chapters, smooth FF/RW, etc.) streamed to your device.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, &

Rights Reserved.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol,

DTS in combination with the Symbol, and DTS Studio Sound are registered trademarks or trademarks of DTS, Inc. in the

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered

trademarks of HDMI Licensing LLC in the United States and other countries.

Open Source Announcement

To send inquiries and requests for questions regarding open sources, contact Samsung via Email (oss.request@samsung.com).

Other Restrictions

Settings

y CMYK and YCCK Color space JPEGs are not supported.

Using the Setup Menu

Playing Multiple Files

■ DivX® Video On Demand: Shows the registration code authorized

■ Playing selected video/music/photo files

for the TV. If you connect to the DivX web site and register with

1. Press the Yellow button in the file list to select the desired file.

10-digit registration code, you can download the VOD activation file.

2. Repeat the above operation to select multiple files.

Once you play it using Media Play, the registration is completed.

✎

For more information on DivX® VOD, visit "http://vod.divx.com".

✎

NOTE

■ Information: Select to view information on the connected device.

The c mark appears to the left of the selected files.

To cancel a selection, press the Yellow button again.

To deselect all selected files, press the

TOOLS

button and select

Other Information

Deselect All.

3. Press the

TOOLS

button, and then select Play Selected Contents.

Installing the Wall Mount Kit

■ Playing the video/music/photo file group

1. While a file list is displayed, move to any file in desired group.

The wall mount kit (sold separately) allows you to mount the TV on the

2. Press the

TOOLS

button, and then select Play Folder.

wall.

For detailed information on installing the wall mount, see the instructions

Media Play - Additional Functions

provided with the wall mount items. Contact a technician for assistance

when installing the wall mount bracket. Samsung Electronics is not

■ Videos/Music/Photos Play Option menus

responsible for any damage to the product or injury to yourself or others

When playing a file, press the

TOOLS

button.

if you elect to install the wall mount on your own.

Hide quick links:

This manual is also suitable for:

5003 5000

Samsung 4000 User Manual page 2

Hide quick links:

Related Manuals for Samsung 4000

Related Products for Samsung 4000

This manual is also suitable for: