Nokia RM-596 Service Manual page 158
Hide thumbs
Also See for RM-596:
- Service manual (33 pages) ,
- Service schematics (13 pages) ,
- Service schematics (15 pages)
Table of Contents
Advertisement
2 Test limits (specified in the product specific data package) are quite tight. Small limit violations do not
always mean that the tested product is broken, but the RF performance may not be as good as it should
be.
3 RX measurements (RSSI, SNR) may fail because of strong signals from base stations nearby. It is
recommended to always perform RF measurements in an RF-shielded environment (in an RF-shield box
or room).
4 The phone is really broken and needs more specific troubleshooting. Typical for these cases is that
Testing gives measurement results which are far from the test limits.
Note:
Start the more specific troubleshooting always from the chapter
troubleshooting (page 4–7 )
without upper level instructions.
Troubleshooting flow — Page 1 of 3
Page 4 – 24
. The troubleshooting flow below may be misleading if followed
COMPANY CONFIDENTIAL
Copyright © 2010 Nokia. All rights reserved.
RM-596
Cellular RF troubleshooting
Cellular RF main
Issue 2
RF
Advertisement
Chapters
Table of Contents
Troubleshooting
