9-2] Network Data Transmission - Panasonic KX-TDA100 Pc Programming Manual
Hybrid ip-pbx
Hide thumbs
Also See for KX-TDA100:
- Programming manual (912 pages) ,
- Features manual (776 pages) ,
- Feature manual (364 pages)
Table of Contents
Advertisement
2.16 [9] Private Network
2.16.2 [9-2] Network Data Transmission
Settings related to the transmission of extension BLF (Busy Line Field) data or Message Waiting
notifications over a network of PBXs can be programmed.
Extension BLF data is used to show the status of a monitored extension attached to another PBX on
a Network DSS (NDSS) button. Network Message Waiting notifications are used for the Centralised
VM feature, and a VPS can send notifications to extensions connected to any PBX in the network.
Network Data Transmission for Centralised Operator Feature—Network PBX
ID
Specifies the Network ID of the PBX, for Network Direct Station Selection (NDSS). This parameter
must be set in correspondence with the Network IDs assigned to other PBXs in the network.
Network IDs 1-8 can only be assigned to one PBX each within a network. Assigning the same
Network ID to two PBXs will cause network data transmission problems.
Changing this value in Interactive mode will automatically clear any NDSS Link Data.
Value Range
0: The PBX retransmits BLF data sent by other PBXs.
1: The PBX receives BLF data sent by other PBXs.
2–8: The PBX transmits BLF data over the network.
Maintenance Console Location
2.16.2 [9-2] Network Data Transmission
Programming Manual References
None
Feature Guide References
1.30.5.1 Network Direct Station Selection (NDSS)
Network Data Transmission for Centralised Operator Feature—Data
Transmission VoIP->ISDN
Selects whether to re-send BLF data received from a VoIP port through any ISDN ports that are set
to transmit BLF data.
Value Range
Disable, Enable
Maintenance Console Location
2.16.2 [9-2] Network Data Transmission
Programming Manual References
2.8.14 [1-1] Slot—Port Property - BRI Port—ISDN CO—Networking Data Transfer
2.8.16 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—CO
Setting—Networking Data Transfer
750
PC Programming Manual
Hide quick links:
Advertisement
Table of Contents
