Sony GRAND WEGA KF-60DX100 Operating Instruction page 77
Hide thumbs
Also See for GRAND WEGA KF-60DX100:
- Service manual (229 pages) ,
- Operating instructions manual (92 pages) ,
- Brochure (2 pages)
Table of Contents
Advertisement
The remote control is preset to operate Sony brand video equipment.
Sony
wjt~b Position
~~ogra~~abie
~~ui~~~nt
on ~~~ot~
Control
Code ~u~ber
Beta, ED Beta VCRs
AVl
303
8 mm VCR
AV2
302
VHS VCR
AV3
301
DVD Player
DVD
751
If you have video equipment other than Sony brand that you want to control
with the LCD projection TV's remote control, use the following procedures
to program the remote control.
~4% The equipment must have infrared (IR) remote capability in order to be
used with the remote control.
From the "Manufacturer's Codes" listed on page
79,
select the three-digit
code number for the manufacturer's code for your component. If more than
one code number is listed, start with the number listed first. Use the code
-2
number to complete the following procedure.
To ~r~~rarn a cable box or a s~teili~~
receiver
1
Open the panel of the remote control.
2
Press
CODE SET
inside the panel.
3
Close the panel and press
SAT/CABLE (FUNCTON).
4
Enter the three-digit manufacturer's code number using the O-9 buttons.
5
Press
ENTER.
-3 6
To check if the code number works, aim the LCD projection TV's
remote control at the component and press the green
POWER
button
that corresponds with that component. If it responds, the programming
4
is completed. If not, try using the other codes listed for that
manufacturer.
77
Advertisement
Table of Contents
