Husqvarna 105 Operator's Manual page 69
Hide thumbs
Also See for 105:
- Operator's manual (153 pages) ,
- Quick manual (8 pages) ,
- Operator's manual (64 pages)
Table of Contents
Advertisement
Message
Wheel motor
overloaded, right
Wheel motor
overloaded, left
No drive
Charging station
blocked
Stuck in charging
station
Upside down
Needs manual
charging
Next start hh:mm
The day's mowing is
complete
Lifted
9. TROUBLESHOOTING
Cause
The robotic lawnmower has got
caught in something.
The robotic lawnmower has got
caught in something.
The working area includes a steep
slope.
The guide wire is not laid at an angle
on a slope.
The contact between the charging
strips and contact strips may be poor
and the robotic lawnmower has made
a number attempts to charge.
An object is obstructing the robotic
lawnmower.
There is an object in the way of the
robotic lawnmower preventing it from
leaving the charging station.
The robotic lawnmower is leaning too
much or has turned over.
The robotic lawnmower is set in the
MAN operating mode.
The timer setting prevents the mower
from operating.
The rest period is in progress. The
robotic lawnmower must dock in the
charging station for at least 8 hours a
day..
The clock on the robotic lawnmower
is not correct.
The rest period is in progress. The
robotic lawnmower must dock in the
charging station for at least 8 hours a
day..
The lift sensor has been activated as
the mower has become trapped.
Action
Free the mower and rectify the
reason for the lack of drive. If it is due
to wet grass, wait until the lawn has
dried before using the mower.
Free the mower and rectify the
reason for the lack of drive. If it is due
to wet grass, wait until the lawn has
dried before using the mower.
Maximum guaranteed slope is 25%.
Steeper slopes should be isolated.
See 3.4 Installation of the boundary
wire on page 24.
If the guide wire is laid on a slope, it
must be laid at an angle across the
slope. See 3.6 Installation of the
guide wire on page 31.
Put the robotic lawnmower in the
charging station and check that the
charging strips and contact strips
make good contact.
Remove the object.
Remove the object.
Turn the mower the right way up.
Put the mower in the charging station.
This behaviour is normal and no
action is required.
Change the timer settings. See
6.3 Timer on page 46.
This behaviour is normal and no
action is required.
Set the time. See Time & Date.
This behaviour is normal and no
action is required.
Free the mower.
English - 69
Hide quick links:
Advertisement
Table of Contents
