Configure The Access Point; Installation - D-Link DWL-6610AP Quick Installation Manual
Unified concurrent dual-band access point
Hide thumbs
Also See for DWL-6610AP:
- Quick installation manual (17 pages) ,
- User manual (754 pages) ,
- Administrator's manual (130 pages)
Table of Contents
Advertisement
Power on the Access Point
To power on the DWL-6610AP, you can use ONE of the following methods:
1. Connect the supplied power adapter, OR
2. Plug one end of your Ethernet cable into the LAN port of the DWL-6610AP, and
the other end into a port on a PoE switch.
Configure the Access Point
To set up and manage the DWL-6610AP, use one of the following methods:
1. Connect the Access Point to your computer directly via a straight-through Ethernet
cable. Manage the Access Point from the computer.
Ensure your computer is configured with a static IP address in the 10.90.90.0/24
subnet.
Launch a web browser, type the default IP address of the Access Point
(http://10.90.90.91) and then press Enter.
Log in to the Administration Web pages. The default login information is:
Username: admin
Password: admin
DWL-6610AP
D-Link DWL-6610AP Quick Install Guide
3. Installation
Computer
5
Hide quick links:
Advertisement
Table of Contents
