HP EliteDesk 705 G2 SFF Hardware Reference Manual page 30
Hide thumbs
Also See for EliteDesk 705 G2 SFF:
- Maintenance and service manual (141 pages) ,
- Hardware reference manual (48 pages) ,
- Product end-of-life disassembly instructions (17 pages)
Table of Contents
Advertisement
9.
Slide the optical drive through the front of the chassis all the way into the bay so that it locks in place
(1), and then connect the power cable (2) and data cable (3) to the rear of the drive.
10.
Connect the opposite end of the data cable to one of the light blue SATA connectors on the system
board.
NOTE:
connectors.
11.
Replace the front bezel if it was removed.
12.
Replace the computer access panel.
13.
If the computer was on a stand, replace the stand.
14.
Reconnect the power cord and any external devices, and then turn on the computer.
15.
Lock any security devices that were disengaged when the access panel was removed.
24
Chapter 2 Hardware upgrades
Refer to
System board connections on page 12
for an illustration of the system board drive
Hide quick links:
Advertisement
Table of Contents
