2. Remove the
display
assembly.
3. Remove the
display assembly
4. Remove the display assembly bezel latch by removing the two M2.5 x 5-mm screws that secure it to the display assembly top cover.
Hinge Covers
Removing the Hinge Covers
1. Remove the
display
assembly.
2. Remove the plastic hinge covers from the hinges.
Replacing the Hinge Covers
1. Attach the display assembly to the bottom case assembly.
HINT:
The right hinge cover is labeled "R," and the left hinge cover is labeled "L." The labels face the back of the computer.
2. Close the display assembly and snap the hinge covers in place over the hinges.
Palm Rest Assembly
bezel.