Sealed And Dustproof Construction; Vibration Absorbing Construction - Hitachi H 45SR Technical Data And Service Manual
Hide thumbs
Also See for H 45SR:
- Handling instructions manual (21 pages) ,
- Handling instruction (28 pages)
Table of Contents
Advertisement
Front cover
8-4. Sealed and Dustproof Construction
The cylinder crank case is sealed by four O-rings and an oil seal which serve to prevent leakage of the grease, as
well as to prevent dust and dirt from entering the mechanism.
8-5. Vibration Absorbing Construction
Hitachi original, innovative units which absorb vibration are installed between the switch handle and the cylinder
crank case and between the switch handle and the housing. As a result, the amount of vibration transmitted from
the main body to the arms of the operator is considerably less in comparison with conventional hammers.
Construction of vibration absorbing unit:
The main body (cylinder crank case and
housing) and the handle are connected through
four cylindrical rubbers (handle dampers).
Vibration is absorbed by the rolling and
compression of the four rubbers on inclined
surfaces. Because the vibration absorbing unit
has non-linear spring characteristics, its spring
constant factor is lower than that of the
conventional shearing rubber type vibration-
absorbing construction, and it provides
significantly higher efficiency in minimizing
vibration. In addition, the interlocking slotted
groove and cylindrical convex portions at the
center prevent the handle from being
disconnected by twisting or pulling, a common
problem with conventional hammers.
Cylinder crank case
O-ring
O-ring
O-ring
Housing
Fig. 7
Cylindrical rubbers (handle damper: 4 pcs.)
Slotted groove
Handle damper retaining material
(Cylinder crank case and housing)
Vibration-
proof rubbers Handle side
Main body side
(a) At no-load
--- 11 ---
Vibration absorbing unit
O-ring
Oil seal
Vibration
absorbing
unit
Handle damper
retaining material
(handle side)
Rolled and compressed
Reaction
(b) At full-load
Fig. 8
Switch handle
Cylindrical
convex
Pressing
force of the
main body
Advertisement
Table of Contents
