4-5. Printed Wiring Board the lead free mark due to their particular size) – USB/FM Section (ICD-P530F) – ........ 14 4-6. Printed Wiring Board – USB Section (ICD-P520) – ..15 : LEAD FREE MARK 4-7. Schematic Diagram Unleaded solder has the following characteristics.
ICD-P520/P530F SECTION 1 This section is extracted from instruction manual. GENERAL Index to Parts and Controls Index to Parts and Controls Main unit (ICD-P520) Main unit (ICD-P530F) MIC (built-in microphone) (headphone) jack MIC (built-in microphone) (headphone) jack (microphone) jack (microphone) jack...
ICD-P520/P530F SECTION 2 DISASSEMBLY • This set can be disassembled in the order shown below. 2-1. CASE (FRONT) ASSY (Page 4) 2-2. MAIN BOARD (Page 5) 2-3. USB BOARD (P520), USB/FM BOARD (P530F) (Page 5) Note: Follow the disassembly procedure in the numerical order shown below.
ICD-P520/P530F SECTION 3 TEST MODE 1. Outline of the TEST MODE 5-3. BEEP Test The TEST MODE is designed to help verify the set when servic- To enter the BEEP Test, press the [ERASE] (P520), [FM•i/ ing it. (P530F) button.
ICD-P520/P530F • SUSPEND Test With the VBUS ON, turn the [HOLD] switch ON to enter the SUS- HOLD PEND mode. When this mode is cancelled, the VBUS is turned OFF. with VBUS Sensitivity H PLAY/STOP (ENTER) HOLD STOP HOLD STOP...
Page 8
ICD-P520/P530F • Switches and corresponding LCD indications Switch Indication DIVIDE (P520) FM•i/5 (P530F) DISPLAY/MENU zXREC/PAUSE NxPLAY/STOP(ENTER) Press DIVIDE button. – . xSTOP > + ERASE (P520) DIVIDE (P530F) Indication after DIVIDE button is pressed. HOLD-OFF HOLD-ON P520 ERASE Indication after DISPLAY/MENU button is pressed.
Page 10
ICD-P520/P530F • Waveforms • IC Block Diagrams THIS NOTE IS COMMON FOR PRINTED WIRING – MAIN Board – BOARDS AND SCHEMATIC DIAGRAMS. IC102 MM3111AWLE (MAIN Board (1/2)) (In addition to this, the necessary note is printed in IC101 (XOUT) IC2002 MM3111AWLE (MAIN Board (1/2)) each block.)
Page 17
ICD-P520/P530F • IC Pin Descriptions IC703 MN101C93KSH (SYSTEM CONTROL, USB/LED/LCD DRIVER) (MAIN BOARD (2/2)) Pin No. Pin Name Pin Description 1 to 4 COM0 to 3 LCD common 0 to 3 signal output 5 to 7 VLC3 to 1 LCD VLC 3 to 1 signal input C2/N.C...
Page 18
ICD-P520/P530F Pin No. Pin Name Pin Description FLMRB Flash memory ready/busy signal input XFLMWP Flash memory write protect signal output XFLMCS0 Flash memory chip select signal output FLMCLE Flash memory command latch enable signal output FLMALE Flash memory address latch enable signal output...
ICD-P520/P530F SECTION 5 EXPLODED VIEWS Note: • -XX and -X mean standardized parts, so • The mechanical parts with no reference they may have some difference from the number in the exploded views are not sup- original one. plied. • Items marked “*” are not stocked since •...
ICD-P520/P530F SECTION 6 MAIN ELECTRICAL PARTS LIST Note: • Due to standardization, replacements in • RESISTORS When indicating parts by reference num- the parts list may be different from the All resistors are in ohms. ber, please include the board name.
Page 26
ICD-P520/P530F REVISION HISTORY Checking the version allows you to jump to the revised page. Also, clicking the version at the top of the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2007.03 2007.06...