Download Print this page

Samsung DCS Technical Manual page 166

Hide thumbs Also See for DCS:

Advertisement

SAMSUNG DCS
TECHNICAL MANUAL
MMC 605:
DESCRIPTION:
Determines which relays will close when one of the four external page zones is accessed.
DCS NOTE: The system must be equipped with a Trunk A card to allow external paging. Each Trunk A card
is equipped with two external page relays. The page relays have default DNs of 360X.
DCS 70 NOTE: A system must be equipped with a MISC card to allow external paging zones. Each MISC
card is equipped with three common relays assigned in MMC 219.
DCS 24 NOTE: The DCS 24 has one external page zone (5).
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1.
Press TRSF 605
Display shows first page zone
2.
Dial page zone number (eg., 6)
OR
Use UP or DOWN to select desired page zone numbers
and use press RIGHT soft key to move the cursor
3.
Dial member number (eg., 05)
OR
Use UP or DOWN to select member numbers and use
the RIGHT soft key to move the cursor
OR
Press the LEFT soft key to return to step 2 above
4.
Dial relay number via dial key pad (eg., 3602) and press
RIGHT soft key to return to step 2
OR
Press LEFT soft key to return to step 3 above
5.
Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA:
RELATED ITEMS:
DCS70 NOTE:
DCS24 NOTE:
Page 166 of 287 Updated I&M
Assign External Page Zone
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
NONE
NONE
Paging output pairs are 361-page 1 (motherboard). 362-page 2 (MISC card).
MMC 219 ASSIGN COMMON RELAY
One external page port and one common relay are located on the base board. The
page relay has default DNs of 361. Optional port is 362(MMC 219).
PROGRAMMING
DISPLAY
EXT. PAGE ZONE:(5)
MEMBER 001:3601
EXT. PAGE ZONE:(6)
MEMBER 001:NONE
EXT. PAGE ZONE:(6)
MEMBER 05: _
EXT. PAGE ZONE:(6)
MEMBER 005:3602
May 2002
SECTION

Advertisement

loading