Table of Contents
Advertisement
Function Settings
This menu is used to display, define and apply various functions.
Item
Various Function
Peaking
Enable
48
OSD Menu
Setting Options (underline indicates factory default)
Displays the function list to execute functions.
Monochrome, Blue Only, Red Off, Green Off, Blue Off, H Delay, V Delay, Backlight Scan,
1
2
Show OSD*
, Banner*
, Function Guide*
1
Show OSD
*
On: D isplays all OSD.
Off: H ides OSD when adjusting SHARPNESS / CHROMA / BRIGHTNESS / CONTRAST or CDL
from the display controller.
2
*
Banner
When "Banner" is set to "Off", the banner is displayed only when you press the SET button while
OSD is closed.
3
*
Function Guide
When "Function Guide" is set to "On", you can display the list of functions assigned to an F button
on the main unit and display controller by pressing the SET button or an F button while OSD is
closed.
4
OSD Position
*
Mode1: OSD is displayed at a position aligned with the four corners of the screen.
Mode2: OSD is displayed slightly centrally as compared to Mode1.
5
*
CDL Override
When "CDL Override" is set to "On", you can temporarily disable the CDL adjustment result and
return to the image quality before adjustment. When returned to the image quality before adjustment,
you cannot adjust the POWER, SATURATION, OFFSET, or SLOPE.
Note
• "H Delay"/"V Delay" can be set only for SDI signal.
• When "H Delay" is "ON", the image display position can be adjusted using the display
controller's for video in 1280x720 / 24.00P, 25.00P, 30.00P format. Adjust with the menu
screen closed.
• When checking the blanking area using "H Delay"/"V Delay", an audio signal check can be
performed, however some data is not displayed.
Customizes peakings which are assigned to Peaking 1 or Peaking 2. The outline is displayed in a
color, used to check the focus.
Switches the peaking display mode and also sets peaking to Off.
Peaking 1, Peaking 2, Off
Peaking 1, 2
Monochrome: Displays video in monochrome.
On, Off
Frequency: Sets the central frequency of contour enhancement signals.
Peaking 1 (High, Middle, Low), Peaking 2 (High, Middle, Low)
Range: Sets the width of the range to be colored.
-3 ~ +3 (0)
Color: Sets the color to be used.
White, Red, Green, Blue, Yellow, Cyan, Magenta
3
4
, OSD Position*
, CDL Override*
5
Advertisement
Table of Contents
