Figure 8-5
8.2
Normal operation
8.2.1
Turning on device
Requirement
• The I/O modules, e.g. mouse and keyboard, have been connected.
• The operating system and the service packs have been installed and set up on the hard
• The pre-installed drivers and applications have been set up appropriately. For more
• The proper ambient and environmental conditions according to the technical data for the
Panel PC 670 V2/870 V2, Control unit
Operating Instructions, Edition 03/2004, CD Documentation and Drivers
Raid promise monitor
Caution
Connect the I/O modules using shielded cable and metal plugs. Otherwise the operating
license expires. Secure the plug of the interface cable on the housing of the device. This
improves the electrical shielding.
Follow the guidelines in the "Interfaces" section of the chapter "Connecting."
disk of the device. For additional information, please refer to the chapter "Starting up" in
the computer unit operating instructions.
information, please refer to the chapter "Additional drivers and applications."
device and the connected I/O modules have been observed.
Operating and parametrizing
8.2 Normal operation
8-7