Sony SRP-X500P Manual page 3
Digital powered mixer
Hide thumbs
Also See for SRP-X500P:
- Interface manual (43 pages) ,
- Operating instructions manual (40 pages) ,
- System integration manual (32 pages)
Advertisement
High-Quality Digital Sound
The SRP-X500P is equipped with a number of
digital signal sound processing functions
including Auto Gain Control (AGC), equalizer,
compressor and feedback reducer, helping to
bring professional sound quality into
multimedia presentations. Each microphone
input channel integrates a digital feedback
reduction function. At the touch of a button,
the audio frequency in which howling is likely
to occur, is detected and suppressed, reducing
unwanted microphone feedback.*
Consequently operators can raise the amplifier's
volume without concern over microphone
howling. The SRP-X500P also incorporates an
A/D and D/A converter with a 24-bit, 48-kHz
sampling frequency for high-quality digital
sound. The four-channel digital amplifier also
maximizes the sound quality of the SRP-X500P.
* When a microphone position is changed,
the feedback reduction function has to be set again.
Integrated Wireless Tuner Unit Slots
The SRP-X500P can accommodate two optional
wireless tuner units, selectable from the
Sony UWP-X series or the
WRU-806A/806B, making it
simple to establish a high-
quality wireless microphone
system for the presentation.
Comprehensive Remote Control
For integrated control of the presentation
system the SRP-X500P offers a variety of
control interfaces - to control peripheral
equipment or to be controlled from an external
control system. These include RS-232C,
Control S and PARALLEL ports.
An optional RM-AV3000 Series Wireless
Remote Commander
®
also provides basic
control functions for both the SRP-X500P and
connected projector.
Remote Control of the SRP-X500P:
• RS-232C (REMOTE): Various settings of the
SRP-X500P can be altered from a PC running the
supplied SRP-X500P Manager. Third-party system
controllers can also be connected to this port to
control the SRP-X500P.
Remote Control of Peripheral Equipment
From the SRP-X500P
• RS-232C (PROJECTOR CONTROL): For remote
control of Power ON/STANDBY and input selection
of Sony projectors.
• Control S (PROJECTOR CONTROL): For remote
control of Power ON/STANDBY and input selection
of the Sony LCD Data Projector VPL-PX15.
Remote Control of Peripheral Equipment
From an External Parallel Interface Box
• PARALLEL (REMOTE): For remote control of
peripheral devices such as video screens
(up/down), window curtains (open/close), and
lighting (on/off).
Front Panel
Advertisement
