GE JSP26 Use And Care Manual page 19

Hide thumbs Also See for JSP26:

Table of Contents

You may feel that your new oven cooks differently

than the one it replaced. We recommend that you

use your new oven for a few weeks to become more

familiar with it, following the times given in your

recipes as a guide.

If you think your new oven is too hot or too cold,

you can adjust the thermostat yourself. If you think

it is too hot, adjust the thermostat to make it cooler. If

you think it is too cool, adjust the thermostat to make

it hotter.

do not recommend the use of inexpensive

thermometers, such as those found in grocery stores,

to check the temperature setting of your new oven.

These thermometers may vary 20-40 degrees.

To Adjust the Thermostat:

1. Press the BAKE pad.

BAKE

2. Select an oven temperature between 500"F.

and 550"F.

3. Immediately, before the BAKE indicator stops

flashing, press and hold the BAKE pad for about

4 seconds. The display will change to the oven

adjustment display.

4. The oven temperature can be adjusted up to

(+) 35"F. hotter or (-) 35°F. cooler. Use the

INCREASE or DECREASE pads to select the

desired change in the display.

5. After you have made the adjustment,

press the CLEAWOFF pad to go back

the time of day display. Use your oven

OFF

as you would normally.

NOTE: This adjustment will not affect the broiling

or self-cleaning temperatures. It will be retained in

memory after a power failure.

Table of Contents

Jsp31