Faq; Troubleshooting - Panasonic ES-LV9N Operating Instructions Manual
Hide thumbs
Also See for ES-LV9N:
- Operating instructions manual (72 pages) ,
- Operating instructions manual (410 pages)
Table of Contents
Advertisement
FAQ
Question
Why does "Dry/Charge"
mode take longer than
"AUTO" mode?
Can I refill the self‑
cleaning recharger with
water when the cleaning
liquid has decreased?
Can the self‑cleaning
recharger be used to
wash other models?
Will the battery deteriorate
if not used for an
extended period of time?
Can I charge the shaver
after every use?
Why is the adaptor
disconnected after use?
What is the constituent of
the dedicated oil and the
detergent?
Answer
This is due to the difference in the
drying time.
The drying time for the "Dry/
Charge" mode is set longer as
there may still be excess moisture
on the areas other than the system
outer foil after the shaver has been
rinsed and cleaned with water.
Do not refill with water as doing
so may deteriorate the cleaning
function.
Replace the cleaning liquid.
This self‑cleaning recharger can only
be used for the ES‑LV9N model.
Doing so may cause malfunction,
so do not use with other models.
The battery will deteriorate if not
used for over 6 months, so make
sure to perform a full charge at
least once every 6 months.
The battery used is a lithium‑ion,
so charging after every use will
have no effect on battery life.
Charging the battery for more
than 1 hour will not affect battery
performance, but disconnect the
adaptor for safety and to save
energy.
Oil: Liquid paraffin
Detergent: Non‑ionic surfactant
agent, antimicrobial agent,
lubricant and fragrance.
Troubleshooting
Perform the following actions.
If the problems still cannot be solved or all self‑cleaning
recharger's lamps blink, contact the store where you purchased
the unit or a service center authorized by Panasonic for repair.
►Self-cleaning recharger
Problem
The blade has not been
thoroughly washed.
The blades are not dry or
are sticky.
Action
If the shaver is not cleaned for
more than 2 weeks, first clean
with the cleaning brush to remove
beard trimmings.
(See page 14.)
Do not add detergent and water
except when replacing the
cleaning liquid.
Doing so may deteriorate the
cleaning function.
(See page 16.)
After cleaning, oil‑like droplets may
remain on the outside of the foil
frame. This is the lubricating
component of the cleaning liquid
and does not indicate a problem.
You may wipe it off with a soft cloth.
The blades may not dry quickly due
to temperature conditions.
Run the "Dry/Charge" mode again or
wipe with a soft cloth before shaving.
17
Hide quick links:
Advertisement
Table of Contents
