Table of Contents
Advertisement
4. Setting the Operating
4.1
Operating time
Alarm time
Cumulative
operating time
Print count
Ink name
Makeup ink
name
Excitation setup
Excitation
frequency
Deflection
voltage
Ambient
temperature
Ink pressure
Ink viscosity
Section 4
Environment
Operation Management
4.1.1
Overview
You can predefine the operating conditions.
The operating time and print count are stored in memory every hour (at 00 minute).
If power failure occur, the previously stored status will be restored.
Item
• The operating time elapsed since the last ink replacement is
displayed. This value can be changed.
• Set the value to "0" after ink replacement. A value between 0 and
9999 hours appears on the display.
• If the preselected alarm time is exceeded, an alarm message appears
to prompt for ink replacement.
• The suggested ink replacement time is displayed.
• The standard value is constantly displayed.
• The cumulative operating time is displayed. This value cannot
be changed.
• The displayed value is incremented up to 999,999 hours.
• The total number of prints made is displayed.This value can
be changed.
• A setting between 0 and 999,999,999 can be selected.
• The type of ink is displayed.
• The type of makeup ink is displayed.
• The excitation setting is displayed.
• The nozzle excitation frequency is displayed.
• The deflection voltage in "Ready" state is displayed.
• The ambient temperature and permissible ambient temperature
range are displayed.
• The ink pressure is displayed.
• The standard value is constantly displayed.
• The ink viscosity is displayed.
• The standard value is 100.
Description
4.1 Operation Management
4–1
- Quick Links:
- Fault Messages
Hide quick links:
Advertisement
Table of Contents
