Sony DSC-HX9V Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Digital Camera
  5. Cyber-shot DSC-HX9V
  6. Service manual

Sony DSC-HX9V Service Manual

Hide thumbs Also See for DSC-HX9V:
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual , User Manual
DSC-HX9/HX9V
SERVICE MANUAL
Ver. 1.4 2012.07
Internal memory
Internal memory
ON BOARD
ON BOARD
Revised-3
Replace the previously issued
SERVICE MANUAL 9-834-574-34
with this Manual.
SERVICE NOTE (Check the following note before the service.)
– ENGLISH –
1-1. PRECAUTION ON REPLACING THE SY-286 BOARD
1-2. PRECAUTION ON REPLACING THE LENS
1-3. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
1-4. HOW TO WRITE DATA TO INTERNAL MEMORY
1-5. SELF-DIAGNOSIS FUNCTION
1-6. PROCESS AFTER FIXING FLASH ERROR
1-7. Reading QR Code
1-8. ORNAMENTAL RING A OR BARRIER ASSY REPLACING METHOD
1-9. CAM TUBE LUBRICATED ASSY REPLACING METHOD
1-10. FINAL INSPECTION
‒ JAPANESE ‒
1-1. SY-286基板交換時の注意
1-2. レンズ交換時の注意
1-3. 内蔵メモリーのデータコピーおよび消去方法
1-4. 内蔵メモリーへデータを書き戻す方法
1-5. 自己診断機能
1-6. フラッシュエラー発生時の対処法
1-7. QRコードの読取り方法について
The components identified by
Les composants identifiés par
mark 0 or dotted line with mark
une marque 0 sont critiques pour
0 are critical for safety.
la sécurité.
Replace only with part number
Ne les remplacer que par une piè-
specified.
ce portant le numéro spécifié.
DSC-HX9/HX9V_L2
9-834-574-35
Canadian Model
Australian Model
Hong Kong Model
Chinese Model
Japanese Model
Photo: DSC-HX9V/Black
DIGITAL STILL CAMERA
Ver.
Date
2
LEVEL
1.0
2011.02
1.1
2011.07
US Model
1.2
2012.03
AEP Model
1.3
2012.06
UK Model
E Model
1.4
2012.07
Korea Model
Tourist Model
Sony Corporation
Revision History
History
Contents
Official Release
Revised-1
• Revision of SERVICE NOTE.
(A1 11-059)
Page 1-3,
1-6
Revised-2
• Correction of ACCESSORIES.
(A2 11-473)
Page
2-7
Revised-3
• Correction of REPAIR PARTS LIST.
(A3 12-131)
Page 2-3, 2-4,
2-5
Supplement-1
• Addition of REPAIR PARTS LIST.
• Addition of SERVICE NOTE.
(S1 12-005)
983457435.pdf
*: S.M. revised only top cover.
S.M. Rev.
issued
—
—
Yes
Yes
Yes
Yes*
2012G08-1
© 2012.07
Published by Sony Techno Create Corporation

Advertisement

Table of Contents
loading

Related Manuals for Sony DSC-HX9V

Summary of Contents for Sony DSC-HX9V

  • Page 1 0 sont critiques pour 0 are critical for safety. la sécurité. Replace only with part number Ne les remplacer que par une piè- specified. ce portant le numéro spécifié. 2012G08-1 DSC-HX9/HX9V_L2 © 2012.07 Sony Corporation 9-834-574-35 Published by Sony Techno Create Corporation...

  • Page 2: Specifications

    動画撮影時 （ 16 ： 9 ） ： 25 ｍｍ ∼ Approx. 50 mm × 22 mm × 54 mm 7.5 cm （ 3.0 型） 、 TFT 駆動 Lens: Sony G 16× zoom lens (3 feet 11 1/4 inches to 9 feet 400 mm* リチャージャブルバッテリー...

  • Page 3: Safety Check-Out

    DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT サービス，点検時には次のことにご注意ください。 ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPO- CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REM- NENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS PLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT 1. 注意事項をお守りください。 無鉛半田について...

  • Page 4: Service Note

    1. SERVICE NOTE – ENGLISH – 1-1. PRECAUTION ON REPLACING THE SY-286 BOARD 1-3. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY DESTINATION DATA The data can be copied/erased by the operations on the HOME screen. (When erasing the data, execute formatting the internal memory.) When you replace to the repairing board, the written destination data of repairing board also might be changed to original setting.

  • Page 5: How To Write Data To Internal Memory

    – ENGLISH – 1-4. HOW TO WRITE DATA TO INTERNAL MEMORY 1-5. SELF-DIAGNOSIS FUNCTION 1-5-2. Self-diagnosis Display Usually, the camera has been set so as to disable the data writing from the PC to the internal memory of the camera. 1-5-1.

  • Page 6: Process After Fixing Flash Error

    Ver. 1.1 2011.07 The changed portions from Ver. 1.0 are shown in blue. – ENGLISH – 1-5-3. Self-diagnosis Code Table 1-6. PROCESS AFTER FIXING FLASH ERROR Self-diagnosis Code When “FLASH error” (Self-diagnosis Code E : 91 : 01) occurs, to prevent any abnormal situation caused by high voltage, setting of the flash is changed automatically to disabling charge and flash setting.
  • Page 7 – JAPANESE – 1-1. SY-286基板交換時の注意 1-3. 内蔵メモリーのデータコピーおよび消去方法 仕向けデータ 内蔵メモリーのデータコピーまたは消去はホーム画面の操作から実行可能です。 （消去する場合は内蔵メモリーの初期化を行います。 ） 補修用基板と交換する時，補修用基板に書かれている仕向けデータは元の設定と違っている場合があります。 Note1：SY-286基板交換の際は，基板交換前に内蔵メモリーのデータを消去して下さい。 Adjust StationからAdjust Manualを起動させて 「DESTINATION DATA WRITE」 を実行させてください。 サイバーショットユーザーガイド Note2：SY-286基板交換の際は，基板交換後に内蔵メモリーのフォーマットおよび初期化を実行して下さい。 リストアデータ 補修用基板と交換する時，交換前の基板よりデータを取得してください。 内蔵メモリーのコピー方法 データの取得はAdjust StationからAdjust Manualを起動させて 「RESTORE DATA」 を実行させてください。 本機で取得されるデータは下記になります。 ･ USB SERIAL No. コピー ･ Angular Velocity Sensor sensitivity adjustment ･...
  • Page 8 – JAPANESE – 1-4. 内蔵メモリーへデータを書き戻す方法 1-5. 自己診断機能 通常は，PCからカメラの内蔵メモリへデータを書き込むことはできない設定になっています。 1-5-1. 自己診断機能について 1-5-2. 自己診断表示 基板交換後などに，内蔵メモリへデータを書き戻す場合には，この設定を一時的に変更する必要があります。 本機の動作に不具合が生じたとき，自己診断機能が働き，LCD 本機の動作に不具合が生じたとき，LCD画面にアルファベッ 設定の変更は，Adjust StationからAdjust Manualを起動させて書き込み許可ツール （Write Enable Tool） を使用します。 画面に，どう処置したらよいか判断できる表示を行います。自 トと4桁の数字が表示され，3.2Hzで点滅します。この5文字の 己診断機能については取扱説明書にも掲載されて 表示によって対応者分類および不具合の生じたブロックの分 書き戻し方法 います。 類，不具合の詳細コードを示します。 1) Adjust StationからAdjust Manualを起動する。 LCD画面 LCD画面 （Write Enable Tool） ボタンをクリックする。 Activate Write Enable Mode ボタンをクリックする。 3.2 Hz点滅...
  • Page 9 Ver. 1.1 2011.07 The changed portions from Ver. 1.0 are shown in blue. – JAPANESE – 1-5-3. 自己診断コード表 1-6. フラッシュエラー発生時の対処法 自己診断コード 本機はフラッシュエラー（自己診断コードE：91：01） が発生した場合，高電圧による異常を防止するために自動的にフラッシュ充 電および発光禁止の設定になります。 対 症状／状態 対応／方法 ブロック 詳細 フラッシュエラー発生後はエラーの解除を行う必要があります。エラーの解除はホーム画面から行います。 応 機能 コード 者 内蔵メモリーに メディアエラー があっ 電源を入れ直す。 フラッシュエラーの解除方法 た。 内...

  • Page 10: Ornamental Ring A Or Barrier Assy Replacing Method

    1-8. ORNAMENTAL RING A OR BARRIER ASSY REPLACING METHOD Creation of Naruto Gear jig Removal Prepare a Naruto Gear Lubricated Assy ( A-1802-347-A ) and a fine-tipped screwdriver (or thin stick such as bamboo skewer). Insert a fine-tipped screwdriver (or thin stick such as bamboo skewer) into the Naruto Gear hole Turn on the power and pull out the lens to set it in the TELE end state.
  • Page 11 1-9. CAM TUBE LUBRICATED ASSY REPLACING METHOD 7 Remove the four screws to detach the Rear Mirror Plate Assy and the Flexible Board Retainer. Screws Removal Remove the screw and remove the Gear Case Assy from the camera body. Remove the FG Plate Spring while releasing the boss and the claw. Pull the two sensors out of the Gear Case Assy.
  • Page 12 Remove the 1 Lens Assy, Barrier Assy, and Ornamental Ring A from the Liner Guide Tube A Assy. Turn the Naruto Gear jig counterclockwise to set the camera body in the retracted state. Note: For removing the Ornamental Ring A, Barrier Assy, and 1 Lens Assy, refer to "1-x. ORNAMENTAL RING A OR BARRIER Note: Turn the Naruto Gear jig to the maximum.

  • Page 13: Installation

    Turn the Liner Guide Tube B Lubricated counterclockwise to the maximum. Installation Turn the objective side upward. Push up the Lens Assy from the eyepiece side with fingers and remove it from the objective side of the Liner Guide Tube B While inserting the five bayonets into the bayonet holes, install the Liner Guide Tube B Lubricated to the Cam Tube Lubricated Lubricated.
  • Page 14 9 Turn the Liner Guide Tube A Assy clockwise to the maximum while holding the Cam Tube Lubricated Assy. Match the bias coma with the cabinet number position, and insert the three projections of the 3 Lens Assy into the three (When the Liner Guide Tube A Assy is turned fully, the 1 lens block is slightly extended as shown in the figure.) perpendicular grooves of the Liner Guide Tube B Lubricated.
  • Page 15 qd Set the Flexible Board and the Naruto Gear insertion hole as shown in the figure, and then install the Main Unit to the Stationary While fitting the Stationary Tube hole A with the boss A of the Rear Mirror Plate Assy, install the Main Unit to the Rear Mirror Plate Tube while inserting the projection A of the Liner Guide Tube B Lubricated into the perpendicular groove A.

  • Page 16: Final Inspection

    1-10. FINAL INSPECTION Apply solder at two points and insert the two sensors into the Gear Case Assy. Install the FG Plate Spring while locking the claw and the boss. 1-10-1. Confirm There is No Fault in Actual Motion/Actual Screen Install the Gear Case Assy to the camera body and tighten a screw.
  • Page 17 1-10-2. Inspection When Cam Tube Block Assy Or Straight Tube Lubricated Assy Is Replaced Focus check 1 Preparation • Camera installed re-assemble lens. • Chart (Printed PDF file at the same magnification) (Refer to <Reference>) • Tripod • Mirror (ex. CD) •...

  • Page 18: Repair Parts List

    2. REPAIR PARTS LIST IDENTIFYING PARTS (ENGLISH) The components identified by mark 0 NOTE: or dotted line with mark 0 are critical for Follow the disassembly in the numerical order given. safety. • -XX, -X mean standardized parts, so they may have some differences from the original Replace only with part number specified.

  • Page 19: Note For Repair

    – ENGLISH – – JAPANESE – NOTE FOR REPAIR 修理時の注意 Cut and remove the part of gilt Cut and remove the part of gilt which comes off at the point. which comes off at the point. • Make sure that the flat cable and flexible board are not cracked (Be careful or some (Be careful or some •...
  • Page 20 Ver. 1.3 2012.06 The changed portions from Ver. 1.2 are shown in blue. 2-1. EXPLODED VIEWS DISASSEMBLY 2-1-1. REAR SECTION 1. Remove to numerical order ( ) in the left figure. ns : not supplied #209 X 3 Bottom View Right View #209 #209...
  • Page 21 Ver. 1.3 2012.06 The changed portions from Ver. 1.2 are shown in blue. DISASSEMBLY 2-1-2. MAIN SECTION 1. Remove to numerical order ( ) in the left figure. SP901 2. The meaning of the sign in left figure is as follows. Be careful when it removes. ◇: Solder (Boss) #192...
  • Page 22 Ver. 1.3 2012.06 DISASSEMBLY 2-1-3. TOP SECTION 1. Remove to numerical order ( ) in the left figure. 2. The meaning of the sign in left figure is as follows. Be careful when it removes. ns : not supplied ◇: Solder Screw #192: M1.4 X 4.0 (Tapping) #217: M1.4 X 2.5...
  • Page 23 DISASSEMBLY 2-1-4. LENS BLOCK SECTION 1. The meaning of the sign in left figure is as follows. Be careful when it removes. ◇-X: Solder ns : not supplied Screw #30: M1.2 X 3.5 (Tapping) (White) 3-086-156-11 (Note 1, 2) Note (including CP001 (CMOS imager)) (Note 3)
  • Page 24 Ver. 1.2 2012.03 The changed portions from Ver. 1.1 are shown in blue. Checking supplied accessories. Note : This item is supplied with the unit as an accessory, but is not prepared as a service part. AC Adaptor Rechargeable battery pack (NP-BG1) Conversion (2P) Adaptor Conversion (2P) Adaptor 0 1-569-008-12 (E: NTSC)
  • Page 25 3. ASSEMBLY Assembly-1: Attaching Method of LCD and LCD Window (790). Assembly-2: The Method of attachment of ST-247 Flexible Board. Peel off the LCD tape (790) from pasted board. Install the ST-247 flexible board to the BT holder block assy as shown in the figure.
  • Page 26 Laser printing type: Refer to Supplement-1 (this manual). – JAPANESE – このモデルで使用されている下記の部品にレーザー印字タイプのものが追加されました。 これらの部品を交換する際は、交換前と同じタイプのものに交換してください。 ・ CABINET BOTTOM ・ BTH ASSY Label タイプ： サービスマニュアル本編を参照してください。 Laser printing タイプ： Supplement-1 （このマニュアル） を参照してください。 2012G08-1 DSC-HX9/HX9V © 2012.07 Sony Corporation 9-834-574-82 Published by Sony Techno Create Corporation...
  • Page 27 A-1870-245-A SERVICE, CABINET BOTTOM (GOLD) A-1870-248-A SERVICE, CABINET BOTTOM (GOLD) A-1870-248-A SERVICE, CABINET BOTTOM (GOLD) DSC-HX9V (AEP, UK, E, AUS, HK Model) DSC-HX9V (AEP Model) DSC-HX9V (AEP, UK, E, AUS, HK 仕向) DSC-HX9V (AEP 仕向) Serial No. Serial No. シリアルナンバー...

This manual is also suitable for:

Dsc-hx9

Table of Contents