Download Print this page

GE Cafe CGU366SEH Dimensions And Installation Information page 2

Series 36" gas rangetop with 6 burners (natural gas)

Advertisement

CGU366SEH
GE Café
Series 36" Gas Rangetop with 6 Burners (Natural Gas)
Dimensions and Installation Information
Backsplash Accessories
The rangetop requires a 12" minimum clearance to a vertical combustible surface
at the rear. A backsplash is required for installations with less than 12" clearance.
The following backsplash accessories are available, or a custom, non-combustible
backsplash can be used.
ZX12B36PSS, 12" backsplash
ZXADJB36PSS, 30"-36" adjustable-height backsplash with warming shelf
Backsplash with Warming Shelf
All Professional Hoods feature infrared warming lights. The 30"-36" adjustable
backsplash with warming shelf is a perfect complement when installed with the
tapered or straight-sided hoods.
• Restaurant-Style Professional Hoods are shipped with a 22" stainless steel
backsplash and warming shelf.
Advance Planning for 36" Professional Rangetops
Professional rangetops offer a number of choices in size and rangetop
configurations.
• All Professional rangetops are factory set for natural or liquid propane gas. The
correct model should be ordered for the installation situation.
Note: Conversion kits are included with the rangetop if the wrong gas type was
ordered. High Altitude kit, WB28K10553, is also available. The kits must be installed
by a qualified service technician at additional cost.
For answers to your Monogram
or GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
Universal Utility Locations
Electrical Requirements
Rangetops must be supplied with 120V, 60Hz, and connected to an individual,
properly grounded branch circuit protected by a 15 amp circuit breaker or time-
delay fuse.
Gas Supply
• Natural gas models are designed to operate at 5" water column pressure. For
proper operation, the pressure of the natural gas supplied to the regulator must
be between 7" and 13" water column.
• The liquid propane models are designed to operate at 10" water column pressure.
®
For proper operation, the pressure of the LP source to the regulator must be
between 11" and 13" water column.
Side View with a Backsplash
Specification Revised 7/14

Advertisement

loading