Panasonic KX-TD500 System Reference Manual page 350

Hide thumbs Also See for KX-TD500:

Table of Contents

2. The T-1 card needs to be installed to free slot no.1, 5 or 9.

Physical port number for each T-1 trunk channel is as follows:

• X : Shelf No. (1=Basic, 2=Expansion 1, 3=Expansion 2)

3. DN Assignment is required when a channel of T-1 card is assigned as "OPX".

4. Select the external clock mode, if your system is interfaced by T-1 interface

with another exchange. Refer to Section 11-C-56.02 "System Clock Mode

(CLK)" and Section 11-C-56.03 "Master Clock Priority (CLP)".

The following two test commands are available for T-1 trunk card.

• Loop Back Test (LBT) - Section 16-E-3.01

• DTMF-Generator/Receiver Test (DTM) - Section 16-E-3.02

Show Quick Links

Chapters

Table of Contents