Table of Contents
Advertisement
DPH-300 User's Manual
Factory Reset
In order to accomplish a Factory Reset of the DPH-300, it is necessary to do the
following:
1) Remove the handset from the base station.
2) Place the base station face-down on a flat surface (such as a table or
3) Insert a bent paperclip or a toothpick in the hole for the Factory Reset
4) While still holding the button down, unplug the power adapter.
5) Wait 10 seconds, then reconnect the power adapter without letting go of
6) Once you have restored power, continue holding the Factory Reset
7) Complete! The DPH-300 should have had the following factory default
8) Note that if your DPH-300 is still connected to the Internet, the auto-
If you need to reset the handset to its original factory default settings, see page
19, HS Setting > Set Default.
10
desk top).
Button (see the photo on page 7 for the button's location), and hold the
button down.
the Factory Reset Button.
Button down for another 10 seconds.
settings restored: IP Address; Call Logs (all).
provisioning process should repeat itself after the factory reset, and the
phone should return to a ready-state showing "D-Link" in the handset
display and allowing IP calling.
Hardware Overview
D-Link Corporation
Advertisement
Table of Contents
