4. Troubleshooting
24) Device does not perform initial setup
•
Symptom : Factory clear or memory clear is performed. Device does not perform initial setup after rebooting.
Firmware version with problem
-
UI : V5.08.10.04_20120605.19 or earlier
-
Main F/W: V11.11.06.02 06-29-2012 or earlier
•
Cause : S/W defect
•
Troubleshooting
1) Turn off the device.
2) Open side cover.
3) Turn on the device as Power Key of UI is pressed.
4) Complete System Recovery (HDD format) and reboot the device.
4-253
Copyright© 1995-2013 SAMSUNG. All rights reserved.