Table of Contents
Advertisement
MIDI Receive Settings
The explanations here apply to the RECEIVE page in step 4 on
receive MIDI data and over which MIDI channels the data will be received.
1
Use the [1 ]/[2 ] (CHANNEL) buttons to select the channel to be received.
The [1 ] button can search the ports while the [2 ] button can search each of channels one by one.
You can use the [1 ] button to skip up or down through the next port, while you can use the [2 ]
button to move up or down to the next channel one by one.
The instrument can receive MIDI messages over 32 channels (16 channels x 2 ports) by USB connection.
2
Use the [3 ] (PART) buttons to select the part via which the selected channel will
be received.
The Parts listed on this display are the same as those shown in the MIXING CONSOLE display and
CHANNEL ON/OFF display with the exception of the following parts.
KEYBOARD: The received note messages control the instrument's keyboard performance.
EXTRA PART 1–5: There are five parts specially reserved for receiving and playing MIDI data.
Normally, these parts are not used by the instrument itself. The instrument can be used as a 32-channel
multi-timbral tone generator by using these five parts in addition to the other parts of the instrument.
3
Use the [4 ]–[8 ] button to determine the types of data to be received.
9
MIDI transmission/reception via the USB terminals
The relationship of the USB terminals and their handling of MIDI messages (transmitting/receiving 32
channels; 16 channels x 2 ports) is shown in the following diagram:
86
PSR-S670 Reference Manual
1
MIDI reception
[USB TO HOST] terminal
Wireless
LAN
Port handling
USB1
Merge
USB1/WLAN
01–16
page
2
3
MIDI transmission
USB2
USB2
01–16
82. This determines which parts will
The dots corresponding to each channel (1–16)
flash briefly whenever any data is received on the
channel(s).
If "WLAN" is shown, this instrument can handle
NOTE
MIDI messages received via the USB wireless LAN
adaptor connected to the [USB TO DEVICE] termi-
nal. When "WLAN" is not shown although the USB
wireless LAN adaptor is connected, turn the instru-
ment off then on again.
[USB TO HOST] terminal
Wireless LAN
USB/WLAN 01–16
Hide quick links:
Advertisement
Chapters
Table of Contents
