r
Skip to play the next message.
q
Delete the current message.
u
Increase the loudspeaker volume by one
level (1 to 8).
d
Decrease the loudspeaker volume by one
level (1 to 8).
8.2
Delete All Messages
q
1. Press and hold
on base to erase all read messages
(applicable only when messages in answering machine
are all read, new message(s) will not be deleted.)
8.3
Announcement
This is the message your callers hear on the answering
machine. There is only one pre-recorded outgoing
messages in Answer and Record mode, and you can record
your own.
44
m
Press and hold
to start recording the personalized
announcement of the current answer mode after hearing a
long beep. Release key to stop recording.
8.4
Memo
You could record your own message in the base answering
machine.
r
Press and hold
to start recording a memo after hearing
a long beep. Release key to stop memo recording.
8.5
Set the answer delay
P
1. Press
when in idle mode to enter the feature menu.
,
>SETUP BS
2. Use
to scroll to
P
,
3. Press
and
to select
P
,
4. Press
and
to select
6 RINGS
.
P
5. Press
to save your preference and return to the
feature menu.
NOTE
If Toll Saver setting is selected, the answering machine will
pick up after two rings if there are new messages and after
four rings if there are no messages.
.
>ANSWER DELAY
.
TOLL SAVER
2 RINGS
4 RINGS
,
,
Using your Answering machine
or