Settings
Radio Setup
To listen to the radio, you must connect the
●
supplied FM antenna.
Operating the Radio with the Remote
Control
Press the
button to select FM.
1.
SOURCE
Tune to the desired station.
2.
Preset Tuning 1 : Press the
●
to select pRESET, and then press the 78
buttons to select a preset station.
- Before you can tune to preset stations,
you must add preset stations to the
product's memory.
Manual Tuning : Press the
●
to select MANUAL, and then press the
78 buttons to tune to a lower or higher
frequency.
Automatic Tuning : Press the
●
button to select MANUAL, and then press
and hold the 78 buttons to automatically
search the band.
Selecting Mono or Stereo
Press the
button.
ST/MO
Each time you press the button, the sound
●
switches between STEREO and MONO.
In a poor reception area, select MONO for a
●
clear, interference-free broadcast.
presetting Stations
Example : Presetting FM 89.10 into memory.
Press the
button to select FM.
1.
SOURCE
Press the 78 buttons to select <89.10>.
2.
Press the
3.
MEMORy
NUMBER flashes on the display.
●
Press the
4.
MEMORy
Press the
MEMORy
●
NUMBER disappears from the display on its
own.
After you press the
●
NUMBER disappears from the display and
the station is stored in memory.
To preset another station, repeat steps 2 to 4.
5.
button
pRESET
button
pRESET
pRESET
button.
button again.
button before
button,
MEMORy
22
To tune to a preset station, press the
●
button to select pRESET, and then
pRESET
press the 78 buttons to select the preset
station.
Recording FM Radio
You can record your favorite radio broadcast on a
inserted USB storage device.
Insert a USB device into the USB jack on the
1.
front of the product.
Press the
2.
SOURCE
then then press the 78 buttons to select
the station you want to record.
Press the
(Red) button to start recording
3.
A
the radio broadcast. Recording begins.
The recorded time is displayed on the left
●
and the recording time still available, based
on the amount of free space in the USB
storage device, is displayed on the right.
Press the e (ExIT) button to finish your
4.
recording. The recording is stopped and
saved as an .mp3 file at the same time. To
play the recorded file, refer to "Playing Files
on a Storage Device".
The recorded file is saved in the Tuner folder
✎
which is created automatically.
Only the
(OpEN/CLOSE),
✎
(ExIT),
(MUTE), and
operable while FM radio is being recorded.
5V 0.5A
If you don't press any buttons while recording,
✎
5V 0.5A
the screen saver will be enabled.
Sound effects, such as DSP, EQ, etc., are not
✎
recorded during FM radio recording.
The radio is recorded at a set, default volume
✎
even if you change the volume or press the
(MUTE) button during the recording process.
If you remove the USB device or Power Cable
✎
during the recording process, the portion of
the file which has already been recorded may
not play back.
Recording will not start if the remaining free
✎
space in the USB storage device is less than
2MB.
If the USB device is removed or has insufficient
✎
space (under 2MB), the appropriate message
is displayed and the recording stops.
- English
button to select FM, and
(pOWER), e
+/ -, buttons are
vOL