Sony HCD-DP800AV Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Stereo System
  5. HCD-DP800AV
  6. Service manual

Sony HCD-DP800AV Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL
Ver 1.4 2003.12
• HCD-DP800AV is the tuner, deck,
CD and amplifier section in MHC-
DP800AV.
Amplifier section
Canadian model:
Continuous RMS power output (reference)
Front speaker:
Center speaker:
Rear speakers:
Total harmonic distortion less than 0.07%
European model:
DIN power output (rated) 60 + 60 watts
Continuous RMS power output (reference)
Front speaker:
Center speaker:
Rear speakers:
Music power output (reference)
Front speaker:
Center speaker:
Rear speakers:
Sony Corporation
9-873-904-15
Home Audio Company
2003L02-1
Published by Sony Engineering Corporation
© 2003.12
HCD-DP800AV
PHOTO : AEP model
Model Name Using Similar Mechanism
CD
CD Mechanism Type
Section
Base Unit Name
Optical Pick-up Name
Tape deck
Model Name Using Similar Mechanism
Section
Tape Transport Mechanism Type
SPECIFICATIONS
Oceanian model:
The following measured at AC 120, 220, 240 V,
50/60 Hz
DIN power output (rated) 90 + 90 watts
100 + 100 watts
30 watts
Continuous RMS power output (reference)
30 + 30 watts
Front speaker:
(8 ohms at 1 kHz, 10%
Center speaker:
THD)
Rear speakers:
(8 ohms at 1 kHz, 65 W)
Other models:
The following measured at AC 120, 220, 240 V,
(8 ohms at 1 kHz, DIN)
50/60 Hz
DIN power output (rated) 90 + 90 watts
80 + 80 watts
30 watts
Continuous RMS power output (reference)
30 + 30 watts
Front speaker:
(8 ohms at 1 kHz, 10%
Center speaker:
THD)
Rear speakers:
150 + 150 watts
60 watts
60 + 60 watts
(8 ohms at 1 kHz, 10%
THD)
COMPACT DISC DECK RECEIVER
Canadian Model
AEP Model
E Model
Australian Model
HCD-DP700
CDM58E-30BD60
BU-30BD60
A-MAX.3
NEW
TCM-230MWR41/AWR41
(8 ohms at 1 kHz, DIN)
120 + 120 watts
40 watts
40 + 40 watts
(8 ohms at 1 kHz, 10%
THD)
(8 ohms at 1 kHz, DIN)
120 + 120 watts
40 watts
40 + 40 watts
(8 ohms at 1 kHz, 10%
THD)
— Continued on next page —

Advertisement

Table of Contents
loading

Related Manuals for Sony HCD-DP800AV

Summary of Contents for Sony HCD-DP800AV

  • Page 1 HCD-DP800AV SERVICE MANUAL Canadian Model AEP Model Ver 1.4 2003.12 E Model Australian Model • HCD-DP800AV is the tuner, deck, CD and amplifier section in MHC- DP800AV. PHOTO : AEP model Model Name Using Similar Mechanism HCD-DP700 CD Mechanism Type...
  • Page 2 DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT FM tuner section CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE Tuning range 87.5 – 108.0 MHz REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY Antenna FM lead antenna DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU Antenna terminals 75 ohm unbalanced DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

  • Page 3: Table Of Contents

    HCD-DP800AV Laser component in this product is capable TABLE OF CONTENTS of emitting radiation exceeding the limit for Class 1. 1. GENERAL ·········································································· 4 2. DISASSEMBY ··································································· 6 3. TEST MODE ···································································· 13 4. MECHANICAL ADJUSTMENTS ····························· 17 5. ELECTRICAL ADJUSTMENTS ·······························...

  • Page 4: General

    HCD-DP800AV SECTION 1 This section is extracted from instruction manual. GENERAL Parts Identification The items are arranged in alphabetical order. Main unit wle;eaes edef eg rdrsrar; 2CH/MULTI r; (23) FM MODE ef (15) REPEAT ef (13) CD wk (8, 12, 13, 18, 19)

  • Page 5: Setting The Time

    HCD-DP800AV Setting the time Turn on the system. Press CLOCK/TIMER SET. When you set the time for the first time, proceed to step 5. Press . or > repeatedly to select “CLOCK SET”. Press ENTER. Press . or > repeatedly to set the hour.

  • Page 6: Disassemby

    HCD-DP800AV SECTION 2 DISASSEMBLY • Abbreviation • The equipment can be removed using the following procedure. CND : Canadian model Case (Top) Loading Panel Front Panel Section : Mexican model : Korea model : Argentine model AUS : Australian model...
  • Page 7 HCD-DP800AV 2-2. LOADING PANEL 4 pull-out the disc tray. CD mechanism deck (CDM58) 1 turn the pulley to the direction of arrow. loading panel front panel side pulley 2 pull-out the disc tray. 2-3. FRONT PANEL SECTION, CD MECHANISM DECK (CDM58) qa CD mechanism deck (CDM58) 0 two screws (+BVTP 3 ×...
  • Page 8 HCD-DP800AV 2-4. TAPE MECHANISM DECK (TCM-230AWR41/MWR41) 1 four screws (+BVTP 2.6 × 8) 2 tape mechanism deck (TCM-230AWR41/MWR41) 2-5. CD PANEL BOARD, PANEL BOARD, OPT IN BOARD 1 five screws (+BVTP 2.6 × 8) two claws qf flat type wire (CN108)
  • Page 9 HCD-DP800AV 2-6. ESCUTCHEON PAD (WITH TOUCH PAD) 1 button (edit) 6 two screws (TPG +P 2 × 8) 8 three screws 3 two screws (+BVTP 2.6 × 8) (+BVTP 2.6 × 8) 9 button (DSP) 2 two screws (+BVTP 2.6 × 8) 5 two screws (TPG +P 2 ×...
  • Page 10 HCD-DP800AV 2-8. TRANS BOARD, MAIN BOARD 4 two screws 8 two screws 6 TRANS board (+BVTP 3 × 8) (+BVTT 4 × 8) 5 two screws 7 two screws (+BVTT 4 × 8) (+BVTT 3 × 8) 1 connector (CN914) 0 t wo screws (+BVTP 3 ×...
  • Page 11 HCD-DP800AV 2-10. LEAF SW BOARD, HEAD (A) BOARD, HEAD (B) BOARD (TCM-230AWR41/MWR41) Note: This illustration is for TCM-230MWR, but in case of TCM-230AWR, you can remove them in the same way. 1 five claws 2 LEAF SW board 3 remove the four solderings.
  • Page 12 HCD-DP800AV 2-12. DRIVER BOARD, MOTOR BOARD, CD SENSOR BOARD 8 screw (+PTPWH 2.6 × 8) 3 two screws (+BVTP 2.6 × 8) 5 MOTOR board 6 flat type wire (CN721) 4 remove the two solderings of motor. 0 screw (+BVTP 2.6 × 8)

  • Page 13: Test Mode

    HCD-DP800AV SECTION 3 TEST MODE [Cold Reset] 3. Cursor segment flash on the FL display tube. The input • The cold reset clears all data including preset data stored in the FUNCTION is changed to GAME. RAM to initial conditions. Execute this mode when returning the set to the customer.
  • Page 14 HCD-DP800AV [Aging Mode] [Tape Deck Section] This mode can for operation check of tape deck section and CD • The sequence during the aging mode is following as below. section. • If an error occurred, stop display that step. • If an error occurred: The aging operation stops and display then status.
  • Page 15 HCD-DP800AV [CD Section] 2. CDM Error History <CDM58 Error History Display> • The sequence during the aging mode is following as below. 11 digits are displayed after the M character. Aging mode sequence (CD section): Example of display : M0FF400220000...
  • Page 16 HCD-DP800AV [CD Service Mode] • This mode can run the CD sled motor freely. Use this mode, for instance, when cleaning the pickup. Procedure: 1. Press `/1 button to turn the set ON. 2. Select the function “CD”. 3. Press three buttons ENTER , DISC 1 , and x simultaneously.

  • Page 17: Mechanical Adjustments

    HCD-DP800AV SECTION 4 SECTION 5 MECHANICAL ADJUSTMENTS ELECTRICAL ADJUSTMENTS Precaution DECK SECTION 0 dB=0.775 V 1. Clean the following parts with a denatured alcohol-moistened swab: 1. Demagnetize the record/playback head with a head record/playback heads pinch rollers demagnetizer. erase head rubber belts 2.
  • Page 18 HCD-DP800AV 2. Turn the adjustment screw and check output peaks. If the peaks DECK B Tape Speed Adjustment do not match for L-CH and R-CH, turn the adjustment screw Note: Start the Tape Speed adjustment as below after setting to the test so that outputs match within 1dB of peak.
  • Page 19 HCD-DP800AV DECK B REC Bias Adjustment 4. Mode: Record Procedure: INTRODUCTION MD/VIDEO (AUDIO) IN When set to the test mode performed in Tape Speed Adjustment, 315 Hz, 50 mV (–23.8 dB) AF OSC when the tape is rewound after recording, the “REC memory mode”...
  • Page 20 HCD-DP800AV FM Tuned Level Adjustment CD SECTION FM RF SSG Note : 1. CD Block is basically designed to operate without adjustment. 75 Ω coaxial Therefore, check each item in order given. 2. Use LUV-P01 (4-999-032-01) unless otherwise indicated. 3. Use an oscilloscope with more than 10MΩ impedance.
  • Page 21 HCD-DP800AV Note: Clear RF signal waveform means that the shape “◊” can be Checking Location: clearly distinguished at the center of the waveform. [BD BOARD] RF signal waveform VOLT/DIV : 200mV TIME/DIV : 500ns level : 1.45 ± 0.3Vp-p E-F Balance (1 Track jump) Check...

  • Page 22: Diagrams

    HCD-DP800AV SECTION 6 Ver 1.1 2001.06 DIAGRAMS THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIA- GRAMS. (In addition to this, the necessary note is printed in each block.) Note on Schematic Diagram: Note on Printed Wiring Boards: •...

  • Page 23: Circuit Board Location

    HCD-DP800AV 6-1. CIRCUIT BOARD LOCATION • WAVEFORMS – BD BOARD – – MAIN BOARD – MOTOR board DRIVER board IC101 yj (XTAO) IC101 ra (TE) IC401 qa (XC-OUT) T301 4 CD PLAY MODE CD PLAY MODE STOP MODE TAPE B REC MODE...

  • Page 24: Block Diagrams

    HCD-DP800AV 6-2. BLOCK DIAGRAMS – TUNER/CD SECTION – AM/FM IF MPX FE1(AR, AUS, KR, MX) (AEP, KR) ( AR, AUS, CND, MX) IC11 FE3(AEP) LPF11 • RCH is omitted • Signal Path RF IF BUFFER L-CH ANT IN IF OUT...
  • Page 25 HCD-DP800AV – MAIN SECTION – J601 L REC OUT IC607(1/2) IC1001 RY1082 TM1001 AR, AUS, KR, MX SOUND PROCESSOR R-CH CENTER IC1201 COUT SPEAKR MD VIDEO Q610 L IN1 J1202 MUTE MAC IN POWER RY1081 R-CH RV1201 SLOUT MIC-VOL L IN4...

  • Page 26: Bd Section

    HCD-DP800AV 6-3. SCHEMATIC DIAGRAM – BD SECTION – • See page 23 for Waveforms. • See page 54, 55 for IC Block Diagrams. • See page 47 for IC Pin Function. –T4 0µH 0µH UDZSTE-173.9B (Page 29)

  • Page 27: Bd Section

    HCD-DP800AV 6-4. PRINTED WIRING BOARD – BD SECTION – • See page 23 for Circuit Boards Location. • Semiconductor Location Ref. No. Location D101 IC101 IC102 IC103 Q101 Q102 (Page 28)

  • Page 28: Main Section

    HCD-DP800AV 6-5. PRINTED WIRING BOARD – MAIN SECTION – • See page 23 for Circuit Boards Location. • Semiconductor Location DRIVER BOARD BOARD BOARD BOARD Ref. No. Location (Page 44) (Page 27) (Page 32) MAIN BOARD (Page 32) A-11 D-11...

  • Page 29: Main Section (1/3)

    HCD-DP800AV 6-6. SCHEMATIC DIAGRAM – MAIN (1/3) SECTION – • See page 23 for Waveforms. • See page 55 for IC Block Diagrams.

  • Page 30: Main Section (2/3)

    HCD-DP800AV 6-7. SCHEMATIC DIAGRAM – MAIN (2/3) SECTION – • See page 23 for Waveforms. • See page 49 for IC Pin Function.

  • Page 31: Schematic Diagram Main Section (3/3)

    HCD-DP800AV 6-8. SCHEMATIC DIAGRAM – MAIN (3/3) SECTION – • See page 55, 56 for IC Block Diagrams.

  • Page 32: Dsp Section

    HCD-DP800AV 6-9. PRINTED WIRING BOARD – DSP SECTION – • See page 23 for Circuit Boards Location. DSP BOARD (SIDE A) • Semiconductor Location Ref. No. Location D607 D608 D609 D610 IC601 IC603 IC604 IC605 IC607 IC608 POT IN REAR...

  • Page 33: Schematic Diagram Dsp Section (1/2)

    HCD-DP800AV 6-10. SCHEMATIC DIAGRAM – DSP (1/2) SECTION – • See page 57 for IC Block Diagrams. • See page 52 for IC Pin Function. DSP BOARD (1/2) IC605 0µH...

  • Page 34: Schematic Diagram Dsp Section (2/2)

    HCD-DP800AV 6-11. SCHEMATIC DIAGRAM – DSP (2/2) SECTION – • See page 57 for IC Block Diagrams. –...

  • Page 35: Opt Section

    HCD-DP800AV 6-12. PRINTED WIRING BOARD – OPT SECTION – • See page 23 for Circuit Boards Location. 6-13. SCHEMATIC DIAGRAM – OPT SECTION – OPT IN BOARD OPT IN REAR BOARD...

  • Page 36: Printed Wiring Board Front Amp Section

    HCD-DP800AV 6-14. PRINTED WIRING BOARD – FRONT AMP SECTION – • See page 23 for Circuit Boards Location. MAIN BOARD MAIN BOARD (Page 28) (Page 28) TRANS • Semiconductor BOARD Location (Page45) Ref. No. Location D801 D802 D821 D830 D831...

  • Page 37: Schematic Diagram Front Amp Section

    HCD-DP800AV 6-15. SCHEMATIC DIAGRAM – FRONT AMP SECTION –...

  • Page 38: Surround Amp Section

    HCD-DP800AV 6-16. SCHEMATIC DIAGRAM – SURROUND AMP SECTION –...

  • Page 39: Surround Amp Section

    HCD-DP800AV 6-17. PRINTED WIRING BOARD – SURROUND AMP SECTION – • See page 23 for Circuit Boards Location. FRONT AMP FRONT AMP MAIN BOARD BOARD BOARD (Page36) (Page36) (Page28) SURROUND AMP BOARD TRANS BOARD (Page45) • Semiconductor Location Ref. No.

  • Page 40: Panel Section

    HCD-DP800AV 6-18. PRINTED WIRING BOARD – PANEL SECTION – • See page 23 for Circuit Boards Location. • Semiconductor Location Ref. No. Location D1114 D1115 D1116 D1117 Q1114 Q1115 Q1116 PANEL BOARD > > • Semiconductor Location Ref. No. Location...

  • Page 41: Schematic Diagram Panel Section (1/2)

    HCD-DP800AV 6-19. SCHEMATIC DIAGRAM – PANEL (1/2) SECTION – • See page 23 for Waveforms. • See page 51 for IC Pin Function.

  • Page 42: Schematic Diagram Panel Section (2/2)

    HCD-DP800AV 6-20. SCHEMATIC DIAGRAM – PANEL (2/2) SECTION – (Page 41) (Page 41)

  • Page 43: Printed Wiring Board Leaf Sw Section

    HCD-DP800AV 6-21. PRINTED WIRING BOARD – LEAF SW SECTION – • See page 23 for Circuit Boards Location. 6-22. SCHEMATIC DIAGRAM – LEAF SW SECTION – 1SS119-25 (Page 28) (Page 29) (Page 28) (Page 28) • Semiconductor Location Ref. No.

  • Page 44: Driver Section

    HCD-DP800AV 6-23. PRINTED WIRING BOARD – DRIVER SECTION – • See page 23 for Circuit Boards Location. • Semiconductor Location Ref. No. Location (Page 28) D701 IC701 IC711 6-24. SCHEMATIC DIAGRAM – DRIVER SECTION – • See page 57 for IC Block Diagrams.

  • Page 45: Trans Section

    HCD-DP800AV 6-25. PRINTED WIRING BOARD – TRANS SECTION – • See page 23 for Circuit Boards Location. • Semiconductor E C B T911 Location POWER TRANSFORMER Ref. No. Location D911 D912 D913 Q971 AEP,AUS,CND, KR,MX • Semiconductor Location Ref. No.

  • Page 46: Trans Section

    HCD-DP800AV 6-26. SCHEMATIC DIAGRAM – TRANS SECTION –...

  • Page 47: Ic Pin Function Description

    HCD-DP800AV 6-27. IC PIN FUNCTIONS • IC101 DIGITAL SIGNAL PROCESSOR (CXD3017Q) (BD Board) Pin No. Pin Name Function SOSQ Sub-Q serial output. SQCK Clock input for SQSO read-out XRST System reset. SYSM Muting input. DATA Serial date input,supplied from CPU.
  • Page 48 HCD-DP800AV Pin No. Pin Name Function CLTV Control voltage input for master VCO. FILO Filter output for master PLL. FILI Filter input for master PLL. Chage-pump output for master PLL. AVDD3 Analog powr supply. — Ground. Power supply. DOUT Not used.
  • Page 49 HCD-DP800AV • IC401 MASTER CONTROL (M30622MGA-A36FP) (MAIN Board (2/3)) Pin No. Pin Name Function AMP-DATA Amp data signal output AMP-CLK Amp clock signal output AMP-LAT Amp latch signal output SIRCS Remote commander signal input DIG-Tx Digital common Tx signal output...
  • Page 50 HCD-DP800AV Pin No. Pin Name Function NO-USE Not used B TRG B deck trigger control signal output AMS-IN AMS signal input CAPM-H/L Capstan moter highi/low speed control signal output CAPM-CNT 1 Capstan moter REV/FWD/STOP control signal output A PLAY A deck play detect signal input...
  • Page 51 HCD-DP800AV • IC1101 DISPLAY CONTROL (MB90M407APF-G-105-BND) (PANEL Board (1/2)) Pin No. Pin Name Function 1 - 7 G7 - G1 Grid drive signal output to the fluorescent indicator 8 - 10 A1 - A3 Segment drive signal output the flourescent indicator tube Vss IO —...
  • Page 52 HCD-DP800AV • IC601 DECODER (CXD9617R) (DSP Board (1/2)) Pin No. Pin Name Function — Ground XRST Reset signal input EXTIN — Sampling frequency switching signal input VDDI Power supply Sampling frequency switching signal input PLOCK Internal PLL lock signal output —...
  • Page 53 HCD-DP800AV Pin No. Pin Name Function MOD0 Operation mode signal input (L : single chip mode, H : use prohibited) EXLOCK Lock signal input VDDI Power supply — Ground 62 - 66 A17 - A13 External memory address output (SRAM)

  • Page 54: Ic Block Diagrams

    HCD-DP800AV 6-28. IC BLOCK DIAGRAMS IC101 CXD3017Q (BD BOARD) 59 58 57 46 45 44 Digital LRCK PCMD OP Amp Interface Digital Asymmetry Converter Analog SW Corrector XTSL TES1 Clock EMPH Generator XVDD TEST XTAI XTAO SERVO DSP GENERATOR XVSS...
  • Page 55 HCD-DP800AV IC103 CXA2581N-T4 (BD BOARD) OFST RW/ROM RFDCI DVCC 11 RFDCO EQ IN 26 RFC 25 VFC 24 BST AC SUM ON/OFF 23 RFG VOFST 22 VCC RW/ROM VOFST RW/ROM RW/ROM 19 TE_BAL DVCC RW/ROM 18 TE APC-OFF(Hi-Z) SW 12...
  • Page 56 HCD-DP800AV IC51 LC72131D (MAIN BOARD (3/3)) PHASE DETECTOR CHARGE PUMP POWER REFERENCE UNLOCK DIVIDER DETECTOR RESET SWALLOW COUNTER 1/16, 1/17 4BITS 12BITS PROGRAMMABLE DRIVER UNIVERSAL DATA SHIFT REGISTER LATCH INTERFACE COUNTER 2 3 4 5 6 7 8 9 IC81...
  • Page 57 HCD-DP800AV IC605 AK4527 (DSP BOARD (1/2)) IC701 BA6956AN (DRIVER BOARD) 44 43 42 41 40 39 38 37 36 35 34 AUDIO MCLK DZF2 CONTROL LOGIC RIN+ SDOS SDOUT RIN– LIN– FORMAT LIN+ CONVERTER SMUTE DATT ROUT1 BICK BICK LRCK...

  • Page 58: Exploded Views

    HCD-DP800AV SECTION 7 EXPLODED VIEWS NOTE: • -XX, -X mean standardized parts, so they may • Hardware (# mark) list and accessories and The components identified by have some differences from the original one. packing materials are given in the last of this mark 0 or dotted line with mark •...

  • Page 59: Front Panel Section

    HCD-DP800AV Ver 1.4 7-2. FRONT PANEL SECTION Tape mechanism deck FL1101 not supplied not supplied Supplied with S1101 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 4-231-804-01 KNOB (VOL) 1-680-279-11 OPT IN BOARD 4-231-803-01 RING (VOL)

  • Page 60: Chassis Section

    HCD-DP800AV 7-3. CHASSIS SECTION not supplied not supplied not supplied 110 (AUS) 110 (CND) 110 (AR) T911 not supplied 110 (AEP, KR, MX) not supplied Les composants identifiés par une The components identified by marque 0 sont critiques pour la mark 0 or dotted line with mark 0 are critical for safety.

  • Page 61: Tape Mechanism Deck Section-1 (Tcm-230Mwr41)

    HCD-DP800AV 7-4. TAPE MECHANISM DECK SECTION-1 (TCM-230MWR41) • The thing that a part A curves is TCM-230MWR41. Note: Two different types of tape mechanism are used depending on models. They maintain compatibility as an entire mechanism even though there are some different parts are used.

  • Page 62: Tape Mechanism Deck Section-2 (Tcm-230Awr41)

    HCD-DP800AV 7-5. TAPE MECHANISM DECK SECTION-2 (TCM-230AWR41) • The thing that a part A doesn’t curve is TCM-230AWR41. Note: Two different types of tape mechanism are used depending on models. They maintain compatibility as an entire mechanism even though there are some different parts are used.

  • Page 63: Cd Mechanism Deck Section (Cdm58E-30Bd60)

    HCD-DP800AV Ver 1.3 2002.08 7-6. CD MECHANISM DECK SECTION (CDM58E-30BD60) M721 BU-30BD60 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 4-933-134-11 SCREW (+PTPWH M2.6X8) X-4953-306-1 HOLDER (BU) (BU-30) ASSY 4-221-679-01 CAM (RELAY) X-4953-307-1 PULLEY (A) ASSY, CHUCKING 4-231-452-01 TABLE (NEW) 4-227-899-01 SCREW (DIA.

  • Page 64: Base Unit Section (Bu-30Bd60)

    HCD-DP800AV 7-7. BASE UNIT SECTION (BU-30BD60) not supplied not supplied not supplied Les composants identifiés par The components identified by mark 0 or dotted line with une marque 0 sont critiques mark 0 are critical for safety. pour la sécurité.

  • Page 65: Electrical Parts List

    HCD-DP800AV SECTION 8 ELECTRICAL PARTS LIST NOTE: Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks • Due to standardization, replacements in the • COILS uH: µH parts list may be different from the parts The components identified by...
  • Page 66 HCD-DP800AV Ver 1.2 2002.03 CD PANEL CD SENSOR DRIVER Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < RESISTOR > D1115 8-719-057-97 DIODE SEL5923A-TP15 (DISC 2) D1116 8-719-057-97 DIODE SEL5923A-TP15 (DISC 3) R101 1-216-821-11 METAL CHIP...
  • Page 67 HCD-DP800AV DRIVER Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < IC > C646 1-162-970-11 CERAMIC CHIP 0.01uF C647 1-126-934-11 ELECT 220uF IC701 8-759-598-69 IC BA6956AN C648 1-126-934-11 ELECT 220uF C649 1-164-360-11 CERAMIC CHIP 0.1uF < RESISTOR >...
  • Page 68 HCD-DP800AV Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C709 1-126-964-11 ELECT 10uF FB606 1-216-805-11 METAL CHIP 1/16W C710 1-126-964-11 ELECT 10uF FB607 1-500-445-21 FERRITE C711 1-162-962-11 CERAMIC CHIP 470PF FB608 1-500-445-21 FERRITE C712 1-162-962-11 CERAMIC CHIP...
  • Page 69 HCD-DP800AV Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R619 1-216-809-11 METAL CHIP 1/16W R684 1-216-809-11 METAL CHIP 1/16W R620 1-216-809-11 METAL CHIP 1/16W R685 1-216-809-11 METAL CHIP 1/16W R621 1-216-809-11 METAL CHIP 1/16W R686 1-216-809-11 METAL CHIP...
  • Page 70 HCD-DP800AV FRONT AMP Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R759 1-216-821-11 METAL CHIP 1/16W C834 1-104-665-11 ELECT 100uF R760 1-216-821-11 METAL CHIP 1/16W C851 1-128-582-11 ELECT 10uF 100V R761 1-216-821-11 METAL CHIP 1/16W (CND)
  • Page 71 HCD-DP800AV FRONT AMP HEAD (A) HEAD (B) LEAF SW Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks IC922 8-759-701-59 IC NJM7809FA R853 1-249-413-11 CARBON 1/4W F IC923 8-759-088-08 IC UPC7812AHF (AEP) R853 1-249-411-11 CARBON 1/4W < COIL >...
  • Page 72 HCD-DP800AV LEAF SW MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < CONNECTOR > 1-162-974-11 CERAMIC CHIP 0.01uF 1-162-974-11 CERAMIC CHIP 0.01uF CN1001 1-784-459-11 CONNECTOR, FFC/FPC 17P 1-126-947-11 ELECT 47uF 1-126-959-11 ELECT 0.47uF < DIODE >...
  • Page 73 HCD-DP800AV MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 1-126-961-11 ELECT 2.2uF C328 1-162-953-11 CERAMIC CHIP 100PF (AEP) 1-162-974-11 CERAMIC CHIP 0.01uF C329 1-130-483-00 MYLAR 0.01uF (AEP) C330 1-126-964-11 ELECT 10uF 1-164-363-11 CERAMIC CHIP 560PF...
  • Page 74 HCD-DP800AV MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C501 1-126-964-11 ELECT 10uF D511 8-719-988-61 DIODE 1SS355TE-17 D950 8-719-028-23 DIODE D3SBA20-4101 C502 1-136-165-00 FILM 0.1uF D959 8-719-028-23 DIODE D3SBA20-4101 C503 1-136-165-00 FILM 0.1uF D961 8-719-988-61 DIODE 1SS355TE-17...
  • Page 75 HCD-DP800AV MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks JR14 1-216-864-11 METAL CHIP 1/16W Q303 8-729-142-46 TRANSISTOR 2SC2001-LK (AEP) JR15 1-216-864-11 METAL CHIP 1/16W Q304 8-729-900-63 TRANSISTOR DTA124ES Q305 8-729-900-80 TRANSISTOR DTC114ES JR19 1-216-864-11 METAL CHIP...
  • Page 76 HCD-DP800AV MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 1-216-825-11 METAL CHIP 2.2K 1/16W R335 1-216-813-11 METAL CHIP 1/16W 1-216-809-11 METAL CHIP 1/16W R336 1-216-846-11 METAL CHIP 120K 1/16W 1-216-829-11 METAL CHIP 4.7K 1/16W R337...
  • Page 77 HCD-DP800AV MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R398 1-216-823-11 METAL CHIP 1.5K 1/16W R486 1-216-809-11 METAL CHIP 1/16W R400 1-216-829-11 METAL CHIP 4.7K 1/16W R487 1-216-833-11 METAL CHIP 1/16W R401 1-216-809-11 METAL CHIP...
  • Page 78 HCD-DP800AV Ver 1.2 2002.03 OPT IN REAR PANEL MAIN MOTOR OPT IN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < VIBRATOR > 4-224-584-01 HOLDER (FL) 1-760-549-31 VIBRATOR, CRYSTAL (4.5MHz) 1-579-900-21 VIBRATOR, CRYSTAL (4.332MHz) (AEP) < CAPACITOR >...
  • Page 79 HCD-DP800AV PANEL Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C1215 1-162-215-31 CERAMIC 47PF Q1201 8-729-119-78 TRANSISTOR 2SC2785-HFE (AR,AUS,KR,MX) C1216 1-126-791-11 ELECT 10uF < RESISTOR > (AR,AUS,KR,MX) R1101 1-249-429-11 CARBON 1/4W C1241 1-162-294-31 CERAMIC 0.001uF R1102...
  • Page 80 HCD-DP800AV PANEL SUB TRANS Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R1170 1-249-417-11 CARBON 1/4W F R1296 1-249-419-11 CARBON 1.5K 1/4W F R1171 1-249-418-11 CARBON 1.2K 1/4W F R1297 1-249-415-11 CARBON 1/4W F R1172 1-249-413-11 CARBON...
  • Page 81 HCD-DP800AV SUB TRANS SURROUND AMP Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks CN901 1-564-321-00 PIN, CONNECTOR 2P C1041 1-126-964-11 ELECT 10uF CN902 1-564-321-21 PIN, CONNECTOR 2P (AEP,AUS,CND,KR,MX) CN902 1-568-106-11 PIN, CONNECTOR 4P (AR) C1042 1-162-286-31 CERAMIC...
  • Page 82 HCD-DP800AV SURROUND AMP TRANS Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R1053 1-249-418-11 CARBON 1.2K 1/4W F L1081 1-420-872-00 COIL, AIR-CORE (AEP) (AEP) L1082 1-420-872-00 COIL, AIR-CORE (AEP) R1053 1-249-417-11 CARBON 1/4W F L1083 1-420-872-00 COIL, AIR-CORE (AEP) (CND) <...
  • Page 83 HCD-DP800AV Ver 1.1 2001.06 TRANS Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < CAPACITOR > X-3378-241-1 MOTOR ASSY 1-454-887-32 SOLENOID, PLUNGER C911 1-128-576-11 ELECT 100uF X-3378-241-1 MOTOR ASSY C912 1-126-960-11 ELECT C913 1-126-968-11 ELECT 100uF...
  • Page 84 HCD-DP800AV REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2001.

Table of Contents